10 PCB for $1 Rasspberry Pi 4 for free

USB TO UART TTL (Wires) Serial Cable (PL2303HX)

SKU
MCP00102W
Rating:
100% of 100
In stock
weight
26.0000
$1.98
-
+
Overview

This USB serial cable supplies +5V at up to 500mA (USB specification limit) along with TxD and RxD sginals -- no hardware handshaking. 

    This USB serial cable supplies +5V at up to 500mA (USB specification limit) along with TxD and RxD sginals -- no hardware handshaking. Now you can test the serial Data with this so cheap one to replace this FT232RL one(USBSerial Adapter). It is very easy to use, you just need to plug it into the computer there will be a com found in the computer. Then you Open the serial tester to test the Serial Data. Please Notice that if you need to program the Arduino board, this module can work, you need to purchase this USBSerial Adapter.
Note: The USB to serial port chip PL2303HX does not support Win 10.

Specification

  • Provides 4-wire, 5V TTL serial interface. Wire color coding as follows ...
    • Red: +5V
    • Green: Tx
    • White : Rx
    • Black: GND
  • Wire length: 45cm

    

Wiki & External links

Write Your Own Review
You're reviewing:USB TO UART TTL (Wires) Serial Cable (PL2303HX)
Your Rating