Crowbits-Terminal

From Elecrow
Jump to navigation Jump to search

Description

The terminal is a transfer module, it allows you to connect output modules with Crowbits by jumper wire. Compared with traditional screw terminals, our screw terminal module doesn’t require a screwdriver or other tools to operate, the jumper wire can be directly inserted into the terminal by hand.

Crowbits-Terminal-1.jpg

Features

  • 3.3V/5V Compatible
  • High current/voltage adaptable


Specification

  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm


Usage

The Crowbits-Terminal has four ports including GND, VCC and two other ports. It usually be used to interface Crowtail wires(signals) with other external non-Crowtail modules

Crowbits-Terminal-Wiki 1.JPG