Camera Module for Raspberry Pi Zero/W

Camera Module for Raspberry Pi Zero/W

BLE4.0 Bluetooth nRF51822 2.4G Wireless Module

BLE4.0 Bluetooth nRF51822 2.4G Wireless Module

4-Way Infrared Sensor Smart Car Tracking Moudle

was $3.20 Special Price $1.60
Availability: Out of stock
SKU
SEP03032I
Weight
30g
This module is designed for automated mechanical devices such as smart cars and robots to provide a multi-functional infrared detection system solution. The probe is made up by infrared transmitter and receiver tubes and other discrete components. Besides, the LM339 voltage comparator which adds a more stable hysteresis circuit as the core device constitutes a control circuit.
The module has various detection capabilities to meet a great variety of automated, intelligent small system applications.

Features

  • Easy to install, easy to use.
  • 4-way works independently, work without restrictions.
  • The control board and probe are independent, the installation location is not limited.

Specifications

  • Module height: ≤10mm
  • Working voltage: 3-6v
  • Working current (4 way): 30-55mA
  • Pull-up resistor: 5.1kΩ

Test

  • For probe:
  • Remove all objects in front of the probe, and do not let the probe point the direction of the sun. Use a multimeter measures the output voltage after power the probe board, the value should be around 1v. Put white paper in front of the probe, the output voltage should be close to power supply voltage.
  • For control board:
  • Remove all objects in front of probe, and do not let the probe point the direction of the sun. Then connect the tested probe to the board, use a multimeter measure the output voltage after powering the control board, the value should be close to power supply voltage. Put white paper in front of the probe, the output voltage should be around 0v.

Package list

  • 4-way infrared tracking sensor module x 1
Write Your Own Review
You're reviewing:4-Way Infrared Sensor Smart Car Tracking Moudle
Your Rating