RFM69 Shield

RFM69 Shield

lora modules

Lora RFM95 Shield-915MHZ-V1.1

Arduino CNC Shield V3.51 - GRBL v0.9 Compatible - Uses Pololu Dr

Rating:
97 % of 100
$20.00
Availability: In stock
SKU
CDP03051C
Weight
68g
Arduino CNC Shield V3.51 - GRBL v0.9 compatible

Description

 

Ever wanted to build a small CNC router or CNC milling machine? Love working with Arduino Micro Controllers? 
What projects can this be used for? 
:Small CNC routers, DIY Laser Cutters, 3D Printers and almost any project where you need to control a stepper motors with high precision. 

At Protoneer we designed this simple Arduino CNC shield kit (Arduino Extension Board) with the following features: 
New with Version 3.51:

· Added circuitry for End-Stop and Probe signal filtering. This eliminates false triggers and makes it possible use non-shielded cable for end-stops/probes.

· Bigger Solder pads making it easier to assemble.

· Probe pin labels have been updated to make it easier to install a probe.

 

Features

· Includes Noise Filers on all endstops and the probing pin.(New in V3.51)

· GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals https://github.com/grbl/grbl)

· 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins A4 and A3)

· 2 x End stops for each axis (6 in total)

· Coolant enable

· Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)(Not Included)

· Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )

· Compact design.

· Stepper Motors can be connected with 4 pin molex connectors or soldered in place. .

· Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)

 

Package list

· Arduino CNC Shield V3.51 - GRBL v0.9 compatible - Uses Pololu Drivers x 1

 

FREQUENTLY ASKED QUESTIONS: 

· What is a CNC router? http://en.wikipedia.org/wiki/CNC_router

· What is GRBL?An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that runs on an Arduino UNO.  https://github.com/grbl/grbl

· What is Arduino?  http://en.wikipedia.org/wiki/Arduino

· What Pololu stepper driver can it use? Pololu A4988 - http://www.pololu.com/catalog/product/1182 or Pololu DRV8825 http://www.pololu.com/catalog/product/2133 works well. Both of these driver are available at Elecrow.

· A4988 Stepper Motor Driver https://www.elecrow.com/a4988-stepper-motor-driver-module.html

· DRV8825 Stepper Motor Driver https://www.elecrow.com/drv8825-stepper-motor-driver-module-p-1347.html

· For more question, please visit forum.protoneer.co.nz

· Wiki

Write Your Own Review
You're reviewing:Arduino CNC Shield V3.51 - GRBL v0.9 Compatible - Uses Pololu Dr
Your Rating
Protoneer
New Zealand
Electronic Prototyping Specialists