Difference between revisions of "1.3 inch IPS TFT LCD Display ST7789"
Jump to navigation
Jump to search
(Created page with "==Discription== This is a 1.3 inch display screen with a resolution of 240 (RGB) x240. It is an IPS full view LCD display panel so the color looks great in any direction. The...") |
|||
| Line 45: | Line 45: | ||
|} | |} | ||
| − | STEP2 Connect wires according to the following wiring diagram | + | :STEP2 Connect wires according to the following wiring diagram<br> |
| + | :[[File:1.3INCH WIRING.png|600px]] | ||
Revision as of 03:08, 15 September 2022
Discription
This is a 1.3 inch display screen with a resolution of 240 (RGB) x240. It is an IPS full view LCD display panel so the color looks great in any direction. The drive IC is ST7789, and the universal 7-pin SPI interface is used.
The bottom has an SD card slot, which makes it easy to load full-color bitmaps from the MicroSD card in FAT16/FAT32 format.
Support the main control MCU such as ESP32/ESP8266/Arduino/STM32.
Specification
- 1.3 inch TFT LCD Display
- Built-in microSD slot
- Operating Voltage: 3.3V
- Backlight: 2-Chip white LED, Vf=3.2V(If=20mA)
- Resolution: 240 (RGB) x240
- Interface: SPI serial
- Drive IC: ST7789
- Operating Temperature: -20℃~+70℃
- Storage Temperature: -30℃~+80℃
- Dimension: 35.8mm x 35.8mm x 5.3mm
- Weight: 7.6g
Pin Discription
Usage
Hardware Connection
- STEP1 Prepare the below stuffs:
Crowduino Uno 1.3 inch IPS TFT LCD Display 
[[File:|300px]] Get one now [ Get one now]
- STEP2 Connect wires according to the following wiring diagram
