The 315MHz controller is suitable for wireless control, you can use the remote controller to control all the four outputs.
- Remote controller
- Operating Voltage: 3.3V DC
- Supply mode: Crowbits Power Module
- Dimensions: 56(L)*31(W)*13(H)mm
1. You also need to prepare a power module, such as Crowbits-Power Supply; Four output modules, such as Crowbits-LED; And a remote control.
2. The connection mode is shown in the figure, but the signal feet of the input module and the output module must be connected.
3. Turn on the power. Press the button on the remote control, the LED of the corresponding interface will light up.