Crowbits-Hall Sensor

From Elecrow
Revision as of 06:40, 28 July 2020 by Admin (talk | contribs) (→‎Usage)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

The hall sensor is a digital input module that is used to measure the magnitude of a magnetic field, it converts the change of magnetic field into a change in output voltage.

Crowbits-Hall-Sensor-1.jpg

Features

  • Digital input module
  • Easy to use
  • High sensitivity


Specification

  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm


Usage

1. You also need to prepare a power module, such as Crowbits-Power Supply, and an output module, such as Crowbits-LED.

2. The connection mode is shown in the figure, but the signal feet of the input module and the output module must be connected.

Crowbits-Hall Sensor-Wiki 1.jpg

3. Then, turn on the power. When the sensor detects N polar magnetic field, the LED behind it will light up.

Crowbits-Hall Sensor-Wiki 2.jpg

Retrieved from "http://wiki.elecrow.com/index.php?title=Crowbits-Hall_Sensor&oldid=3504"