Crowbits-LED (Red Green Yellow)

From Elecrow
Revision as of 18:25, 30 July 2020 by Admin (talk | contribs) (Created page with "== Description == The LED is a digital output module, it will bring light to your project. Crowbits includes 3 different type of LED colors, all are the same except the color...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

The LED is a digital output module, it will bring light to your project. Crowbits includes 3 different type of LED colors, all are the same except the color. The kit includes: Red LED, Green LED and Yellow LED.

Crowbits-Buzzer-1.jpg

Features

  • 5mm LED
  • Digital output module

Specification

  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm


Usage

1.You also need to prepare a power module, such as Crowbits-Power Supply, and an input module, such as Crowbits-Touch Sensor.

2.The connection mode is shown in the figure, but the signal feet of the input module and the output module must be connected.

Crowbits-Buzzer-Wiki 1.jpg

3.Then, turn on the power. When you touch the sensor with your hand, the LED light will light up; Otherwise, the LED will be off.