Skip to content

Crowbits-Pressure Sensor

Description


The pressure sensor is an analog input module, it is a touch-activated sensor. The pressure sensor controls your circuit by how much pressure you put on it.

Crowbits-Pressure-Sensor-1.jpg

Features


  • Analog input module

Specification


  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Range of forces: 0.2N to 20N (100g~10KG)
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm

Usage


1. You also need to prepare a power module, such as Crowbits-Power Supply, and an output module, such as Crowbits-LED.

2. The connection mode is shown in the figure, but the signal feet of the input module and the output module must be connected.

Crowbits-Pressure Sensor-Wiki 1.jpg

3. Turn on the power. Press the sensor slowly and you will see that the LED behind it will gradually light up.

Crowbits-Pressure Sensor-Wiki 2.jpg