Difference between revisions of "Crowbits-Recorder"

From Elecrow
Jump to navigation Jump to search
 
Line 21: Line 21:
 
2. Connect the speaker to the seat, the connection mode is shown in the figure.
 
2. Connect the speaker to the seat, the connection mode is shown in the figure.
  
[[File: [[File: Crowbits-Recorder-Wiki 1.jpg |600px]]
+
[[File: Crowbits-Recorder-Wiki 1.jpg |600px]]
  
 
3. Turn on the power.
 
3. Turn on the power.
Line 29: Line 29:
  
 
*You could press the “Play1” button to pause your recording
 
*You could press the “Play1” button to pause your recording
 
[[File: Crowbits-Buzzer-Wiki 1.jpg |600px]]
 

Latest revision as of 12:21, 28 July 2020

Description

The recording module can record your voice, and is easy to store and read.

Crowbits-Recorder-1.jpg

Features

  • Low power consumption
  • User-friendly operation


Specification

  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm


Usage

1. You also need a power module, such as Crowbits-Power Supply; A 2 Pin interface speaker.

2. Connect the speaker to the seat, the connection mode is shown in the figure.

Crowbits-Recorder-Wiki 1.jpg

3. Turn on the power.

  • When you record, you need to press the “Record” button, the LED on the board will light up until you finish recording.
  • You could press the “Play2” button to play your recording.
  • You could press the “Play1” button to pause your recording