Crowbits-Touch Sensor

From Elecrow
Revision as of 02:03, 27 July 2020 by Admin (talk | contribs) (→‎Description)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

The touch sensor is a digital input module, it’s a capacitive touch sensor. The touch sensor only has to be touched by an object to operate, it can be used as a touch switch.

Crowbits-Touch-Sensor-1.jpg

Features

  • Low power consumption
  • Digital input module


Specification

  • Operating Voltage: 3.3V DC
  • Supply mode: Crowbits Power Module
  • Dimensions: 31.5(L)*24.5(W)*13(H) mm


Usage

1. You also need to prepare a power module, such as Crowbits-Power Supply, and an output module, such as Crowbits-LED.

2. The connection mode is shown in the figure, but the signal feet of the input module and the output module must be connected.

3. Then, turn on the power. When the sensor detects a hand touch, the LED behind it will light up.

Crowbit-Touch Sensor.jpg

Retrieved from "http://wiki.elecrow.com/index.php?title=Crowbits-Touch_Sensor&oldid=3234"