IO Shield For Arduino Nano

From Elecrow
Jump to navigation Jump to search

Description

This Arduino Nano IO Shield can easy support Nano and Pro. Because the Arduino Nano and Pro is too small to connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of Nano or Pro.
Module: MCS01005S

13993452620 2.jpg

Alt text

Features

  • Analog/Digital inputs with VCC/GND
  • Digital IO port 13 ports prepared to digital modules or servos
  • Analog IO Port 6 ports prepared to analog sensor input
  • Breakout I2C and UART communicate port.


Specification

  • Dimension: 57.2 * 53.5mm


Schematic

IO SHIELD sch.jpg

  • Reserved port&GVS on top
Reserved port&GVS.jpg
  • Voltage ragulator:5V to 3.3V
Voltage ragulator 5to3v3.jpg
  • Slot for NANO board
Slot for NANO board.jpg
  • Serial port
UART.jpg


  • 3V3
3V3.jpg
  • LED
IO SHIELD LED.jpg
  • Power module
PWR.jpg
  • GVS at the bottom
GVS bottom.jpg
  • Reserved port available for UNO at the bottom
Reserved port available for UNO BOT.jpg


FAQS

You can list you question here or contact with techsupport@elecrow.com for technology support.

Retrieved from "http://wiki.elecrow.com/index.php?title=IO_Shield_For_Arduino_Nano&oldid=4665"