LCD1602 for microbit shield

Description

This shield is specially designed for Micro: bit, LCD1602 and Micro: bit using 4-wire connection, it is the same size as LCD1602 display and has 4 crowtail interface, IIC, UART, analog port and digital port. LCD1602 display contrast also can be adjusted.

Model: DTS02115S

There are two versions of the LCD1602_for_microbit module

The simulation pin of V2.0 version is connected to P0 pin of micro:bit, and the simulation pin of V2.1 version is connected to P3 pin of micro:bit.

Features

• Apply to Micro: bit.
• The contrast also can be adjusted.
• 4-wire communication.

Specifications

• Crowtail interface : IIC, UART, analog port and digital port
• Output voltage:5v
• Size: 37mm x 80mm

Usage

Step 1: Open python.microbit.org/v/3, then log in.

Step 2: Step 2: First click Project and then click Open to open the lcd display program.

Step 3: Step 3: Click Send to micro:bit. (If it is the first time to download, please follow the prompts on the page to install the corresponding firmware).

You can also drag hex files into the generated drive.

Step 4: The test code downloaded successfully. Observe the display on the 1602 LCD, and "Hello World" will appear first.

Note:If there is no display or the display is blurry, please use a screwdriver to adjust the potentiometer U1.