Screw Shield

From Elecrow
Revision as of 11:07, 8 June 2022 by Admin (talk | contribs) (Created page with "==Description == The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, includi...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Description

The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.
The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield.
Module:MCS01110

13995142211 1.jpg

Alt text


Schematic

Screwshieldsch.png


FAQs

You can list you question here or contact with techsupport@elecrow.com for technology support.

Resources

ScrewShield-Eaglefile.zip