Smart Pump Shield

Description

The smart Pump Shield is based on Arduino Lenardo which has integrated into the mainboard. The mainboard will send the command to turn on the pump and suck water into the switch, the switch will separate the stream and will give just enough water for your plants. Then it will close the pump and the switch and continue to check when does your plant needs water. We add a RTC to set timing watering and a 0.96 inch OLED to show the time and the soil moisture status.

Model: PSMC18001M

Features

• Eliminates the need for messy jumpers and breadboards, connect all sensors and modules with ease!
• Integrated Arduino UNO into the main board, program it easily.
• Power the board with single 12V power supply directly.
• 4 interfaces for sensors, one interface for water switch and one interface for motor or pump.

Specifications

Item	Value
Size of the box	25 x 19 x 5.7cm
Length of water pipe	5m
Length of 4 Pin Crowtail cable	1m

Interfaces

Usage

Hardware Connection

Connect the Smart Pump Board to your computer system

Attach the micro USB side of the cable to the Smart Pump Board and the other end of the USB cable to an USB port in your computer.

Notice：Please power the board by DC power when you upload the code

Software

STEP 1. Download the library and the program

• 1.Download the Library: Watering_kit_library.zip and extract it. Copy it to the file-libraries in the arduino IDE file,

i.e. D:\Program Files (x86)\Arduino\libraries.

• 2.Download the program at watering_kit.zip Extract the file from the zip file. The filename is watering_kit.ino