Search results

Jump to navigation Jump to search

Create the page "Shield" on this wiki! See also the search results found.

Page title matches

  • GPS shield
    The GPS Shield is base on the ublox's NEO-6M receiver module , and the footprints is compa ...an send GPS data to phone by SMS, then you can get the position of the GPS Shield.
    5 KB (702 words) - 04:00, 22 August 2019
  • Screw Shield
    The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also ...om the bad port connection. Feel secure with this arduino-compatible screw shield.<br>
    1 KB (167 words) - 03:07, 8 June 2022
  • Rainbow Shield
    ...l?cPath=138 seeed rainbow cubes]. With the help of Arduino/Crowduino, this shield can driver a max of 192 single color LEDs, or 64 RGB LEDs. it uses two MY92 [[File:Rainbow Shield Hardware2.jpg|600px]]
    5 KB (721 words) - 03:49, 22 August 2019
  • XBee shield
    XBee shield will make interfacing multiple Bee-style (XBee, GPS Bee, Bluetooth Bee and [[File:Xbee Shield.jpg |600px]]
    8 KB (1,090 words) - 03:49, 22 August 2019
  • Pico Shield
    ...-on board. You can directly use the Pre-Soldered Pico and plug it into the shield board, connect the Crowtail series sensors, and start developing your new p ...berry-pi-pico-with-2-i2c-3-analog-2-uart-1-swd-1-debug-interface.html Pico Shield]'''<br>
    10 KB (1,403 words) - 08:16, 27 December 2023
  • Joystick Shield
    The Joystick Shield enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five mom This shield is a great piece of uer interface board, it is perfect for gaming and navig
    4 KB (455 words) - 04:22, 5 August 2021
  • Ehternet Shield
    The Ethernet Shield connects your Arduino device to the internet in mere minutes. Just plug thi ...owered RJ45 pot, you can flexibly add most shields on top of this Ethernet Shield.
    6 KB (1,073 words) - 03:50, 22 August 2019
  • RFM69 Shield
    The RFM69 Shield- 434MHZ is an inexpensive and versatile radio module. You can use it to sen '''Model: [https://www.elecrow.com/rfm69-shield.html ACS15238R]'''<br>
    5 KB (923 words) - 09:06, 24 July 2023
  • WiFi Shield
    ...her stations, etc. We prepared an easy and convenient command set for this shield so that you can use neat and concise code to run the function. '''Model：[https://www.elecrow.com/wifi-shield-p-428.html ACS17101S]'''<br>
    5 KB (664 words) - 03:52, 22 August 2019
  • Relay Shield
    The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an '''Note''': Take care the pins on the Shield should not touched the USB connector of Arduino UNO when they connected .
    5 KB (820 words) - 04:04, 22 August 2019
  • NFC Shield
    The NFC(Near Field Communications) Shield uses a highly integrated transceiver module PN532 which handles contactless With the arduino library, you can read and write a 13.56MHz tag with this shield or implement point to point data exchange with two NFC Shields.
    9 KB (1,374 words) - 04:11, 5 August 2021
  • EM Shield
    Energy Monitor Shield is an Arduino-compatible expansion card designed for building energy monito [[File:EMS_intro.jpg|600px|Energy Monitor Shield]]
    8 KB (1,056 words) - 04:17, 5 August 2021
  • CC3000 WiFi Shield
    This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a sel [[Image:CC3000 WiFi Shield1.jpg|600px|CC3000 WiFi Shield.jpg]]<br>
    13 KB (1,682 words) - 08:36, 5 August 2021
  • Motor Shield v1.0
    ...controlling 2 DC motor, Only 4 control pins were needed, which makes this shield easier to control, and saves the control pins of controller. The Drive curr [[File:Motor Shield interface.png|700px]]
    10 KB (1,402 words) - 04:01, 22 August 2019
  • CAN-BUS Shield
    ...you store the diagnostic information in the SD card directly, making this shield ideal for data logging application.<br> '''Model: [http://www.elecrow.com/canbus-shield-p-1133.html AS54887CAN]''' <br>
    8 KB (1,167 words) - 04:08, 22 August 2019
  • VS1053 MP3 Shield
    ...he other side of the board, you can play mp3 files from SD card using this shield. It is easily to drop it in your project or make a mp3 player using your Ar '''Model: [http://www.elecrow.com/vs1053-mp3-shield-p-777.html ASVS1053MP]'''<br>
    22 KB (2,945 words) - 02:55, 1 April 2022
  • Arduino CNC Shield
    At Protoneer we designed this simple Arduino CNC shield kit (Arduino Extension Board) with the following features: <br> '''Model: [https://www.elecrow.com/arduino-cnc-shield-v3-51-grbl-v0-9-compatible-uses-pololu-drivers.html CDP03051C]'''<br>
    3 KB (439 words) - 10:08, 9 June 2022
  • AVR ISP Shield
    ...f jumper wires but we've just made it a ton easier on you with the AVR ISP Shield!<br> '''Model: [http://www.elecrow.com/avr-isp-shield-v11-p-563.html ACS26020S]'''<br>
    3 KB (440 words) - 06:26, 1 April 2022
  • Bluetooth Shield v1.0
    ...om Arduino D0 to D7 as Software Serial Ports to communicate with Bluetooth Shield (D0 and D1 is Hardware Serial Port). It also expand five analog IOs that yo '''Model: [http://www.elecrow.com/bluetooth-shield-masterslave-p-332.html MCS01108S]'''<br>
    7 KB (971 words) - 03:50, 22 August 2019
  • Motor&Stepper Shield
    ...Motor$ Stepper Shield, which is the upgrade version of the previous Motor Shield. <br> ...e upto 2A. Contrast to the motor shield, the new generation Motor& Stepper Shield has the follow advantage:<br>
    10 KB (1,433 words) - 04:03, 22 August 2019

Page text matches

  • SIM808 GPRS/GSM+GPS Shield
    | [[File:GPRS+GSM+GPS Shield.jpg|200px|GPRS+GSM+GPS Shield]] | [[File:GPRS+GSM+GPS Shield.jpg|200px|GPRS+GSM+GPS Shield]]
    357 bytes (56 words) - 04:02, 22 August 2019
  • Crowtail-base shield for Microbit
    This shield integrated 6 crowtail connectors and 2 crowtail UART/IIC connectors on boar '''Model: [https://www.elecrow.com/crowtail-base-shield-for-microbit.html DTS03558C]'''<br>
    836 bytes (123 words) - 04:23, 8 April 2021
  • IO Shield For Arduino Nano
    ...connect to jumper wires or breadboard. So this Nano IO Shield is born. The shield has lead out all IOs of Nano or Pro.<br> '''Module: [https://www.elecrow.com/io-shield-for-arduino-nano-p-337.html MCS01005S]'''
    1 KB (227 words) - 01:15, 9 June 2022
  • Screw Shield
    The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also ...om the bad port connection. Feel secure with this arduino-compatible screw shield.<br>
    1 KB (167 words) - 03:07, 8 June 2022
  • Crowtail-Nano Base Board
    The Crowtail- nano Base Shield plugs into Crowduino Nano module and play the foundation of the Crowtail sy The purpose of the base shield is to allow easy connection of any microprocessor input and output pins to
    1 KB (214 words) - 05:32, 22 August 2019
  • Crowtail- Base Shield
    The Crowtail- Base Shield plugs into Arduino and is the foundation of the Crowtail system. ALL I/O po '''Model:[http://www.elecrow.com/crowtail-base-shield-p-1264.html CT0001BS]'''<br>
    1 KB (232 words) - 07:33, 6 April 2020
  • Serial JPG Camera
    ...able-c-109/shield-c-109_110/wireless-sd-shield-p-333.html Wireless SD Card Shield] === Use Camera with Arduino and wirelss SD card shield===
    3 KB (489 words) - 04:32, 22 August 2019
  • Lora RFM95 Shield- 915MHZ
    ...on a Arduino shield form factor and based on Open source library.The Lora Shield allows the user to send data and reach extremely long ranges at low data-ra Using Hope RF's patented LoRa™ modulation technique the Lora Shield can achieve a sensitivity of over -148dBm using a low cost crystal and bill
    3 KB (537 words) - 10:21, 19 February 2020
  • 8-Channel EL Shield
    ...cult to work with because of the high-voltage requirements. The Elecrow EL Shield enables you to implement up to 8 channels of EL wires or tapes in to your p ...ertor is needed for this EL shield.Besides, there is also the 8-Channel EL Shield Kit which includes all the modules you need for a EL wire project.
    4 KB (724 words) - 04:01, 22 August 2019
  • Crowtail- Serial Camera
    ...able-c-109/shield-c-109_110/wireless-sd-shield-p-333.html Wireless SD Card Shield] 1.Plug it onto the U2 port of Crowtail- Base Shield using a Crowtail cable and plug one button onto digital 12 port.
    2 KB (336 words) - 06:19, 22 August 2019
  • AVR ISP Shield
    ...f jumper wires but we've just made it a ton easier on you with the AVR ISP Shield!<br> '''Model: [http://www.elecrow.com/avr-isp-shield-v11-p-563.html ACS26020S]'''<br>
    3 KB (440 words) - 06:26, 1 April 2022
  • GPS shield
    The GPS Shield is base on the ublox's NEO-6M receiver module , and the footprints is compa ...an send GPS data to phone by SMS, then you can get the position of the GPS Shield.
    5 KB (702 words) - 04:00, 22 August 2019
  • Rainbow Shield
    ...l?cPath=138 seeed rainbow cubes]. With the help of Arduino/Crowduino, this shield can driver a max of 192 single color LEDs, or 64 RGB LEDs. it uses two MY92 [[File:Rainbow Shield Hardware2.jpg|600px]]
    5 KB (721 words) - 03:49, 22 August 2019
  • Joystick Shield
    The Joystick Shield enable your Arduino with a joystick! The shield sits on top of your Arduino and turns it into a simple controller. Five mom This shield is a great piece of uer interface board, it is perfect for gaming and navig
    4 KB (455 words) - 04:22, 5 August 2021
  • Wireless SDshield
    ...sing a wireless module, and adds storage to your Arduino project. The XBee Shield is based on the Xbee modules from Digi,but can use any Bee module with the ...PI ports of Arduino to transfer data with SD , and you can plug more other shield on it.
    5 KB (743 words) - 04:33, 5 August 2021
  • Crowtail- Super Bright
    1. Connect the LED to Base Shield's digital D12 with 4pin Crowtail Cable and micro USB cable to micro USB por
    2 KB (245 words) - 06:21, 22 August 2019
  • Smart Pump Shield
    The smart Pump Shield is based on Arduino Lenardo which has integrated into the mainboard. The ma '''Model: [https://www.elecrow.com/crowtail-smart-pump-shield-v2-1.html PSMC18001M]'''<br>
    5 KB (888 words) - 01:08, 2 June 2022
  • Crowtail- LED
    1. Connect the LED to Base Shield's digital port 5 with 3pin Crowtail Cable.
    2 KB (273 words) - 05:26, 22 August 2019
  • USB Host Shield for Arduino
    ...lanove, but also big Mega and Mega 2560 work with Standard variant of this shield out of the box. Of course it is compatible with Crowduino, too. <br> '''Model: [http://www.elecrow.com/usb-host-shield-for-arduino-p-686.html ARS3421U]'''<br>
    4 KB (551 words) - 06:12, 1 April 2022
  • Relay Shield
    The Relay Shield is an Arduino compatible smart module with 4 mechanical relays providing an '''Note''': Take care the pins on the Shield should not touched the USB connector of Arduino UNO when they connected .
    5 KB (820 words) - 04:04, 22 August 2019

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)

Retrieved from "http://wiki.elecrow.com/index.php?title=Special:Search"