10 PCB for $1 Rasspberry Pi 4 for free

Triple Axis Accelerometer Breakout - MMA7361

SKU
SPS07361S
In stock
weight
3.0000
$5.80
-
+
Overview
This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges.
    This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices.

Specification

  • Two selectable measuring ranges (±1.5g, ±6g)
  • Low current consumption: 400 µASleep mode: 3 µA
  • Low voltage operation: 2.2 V - 3.6 V
  • High sensitivity (800 mV/g at 1.5g)
  • Fast turn on time (0.5 ms enable response time)
  • Dimensions: 28 * 17mm

Wiki & External links

Write Your Own Review
You're reviewing:Triple Axis Accelerometer Breakout - MMA7361
Your Rating