ESP-12S Wifi Module (ESP8266)

Description

This ESP-12S WiFi module has a core processor ESP8266 in smaller sizes of the module encapsulates Tensilica L106 integrates industry-leading ultra-low power 32-bit MCU micro, with the 16-bit short mode, clock speed support 80 MHz, 160 MHz, supports the RTOS, integrated Wi-Fi MAC/BB/RF/PA/LNA, on-board antennas. The module supports standard IEEE802.11 b/g/n agreement, a complete TCP/IP protocol stack. Users can use the add modules to an existing device networking, or build a separate network controller.

ESP8266 is a high integration wireless SOCs, designed for space and power constrained mobile platform designers. It provides unsurpassed ability to embed Wi-Fi capabilities within other systems or to function as a standalone application, with the lowest cost, and minimal space requirement.

Features

• 802.11 b/g/n
• Integrated low-power 32-bit MCU
• Integrated 10-bit ADC
• Integrated TCP/IP protocol stack
• Integrated TR switch, balun, LNA, power amplifier and matching network
• Integrated PLL, regulators, and power management units
• Supports antenna diversity
• Wi-Fi 2.4 GHz, support WPA/WPA2
• Support STA/AP/STA+AP operation modes
• Support Smart Link Function for both Android and iOS devices
• SDIO 2.0, (H) SPI, UART, I2C, I2S, IRDA, PWM, GPIO
• STBC, 1x1 MIMO, 2x1 MIMO
• A-MPDU & A-MSDU aggregation and 0.4s guard interval
• Deep sleep power <10uA, Power down leakage current < 5uA
• Wake up and transmit packets in < 2ms
• Standby power consumption of < 1.0mW (DTIM3)
• +20dBm output power in 802.11b mode

Specifications

• WiFi Protocles：802.11 b/g/n
• Frequency Range：2.4GHz-2.5GHz (2400M-2483.5M)
• Peripheral Bus：UART/HSPI/I2C/I2S/Ir Remote Contorl；GPIO/PWM
• Operating Voltage ：3.3V
• Operating Current: Average value: 80mA
• Operating Temperature Range: -40°~125°
• Ambient Temperature Range: Normal temperature
• Package Size: 18mm*20mm*3mm
• External Interface: N/A`
• Wi-Fi mode: station/softAP/SoftAP+station
• Security: WPA/WPA2
• Encryption: WEP/TKIP/AES
• Firmware Upgrade: UART Download / OTA (via network) / download and write firmware via host
• Support software Development: Supports Cloud Server Development / SDK for custom firmware development
• Network Protocols: IPv4, TCP/UDP/HTTP/FTP
• User Configuration: AT Instruction Set, Cloud Server, Android/iOS APP

Package list

• ESP-12S Wifi Module (ESP8266) x1

Wiki & External links

• User manual