Illuminated Toggle Switch with Cover

Equipped with an aerodynamic red protective casing, and a red LED at the tip of the switch, this Red LED Toggle Switch is sure to add some flair (and flare!) to your project. With this device, you can mimic a racing car, fighter jet, submarine status panel, factory controls, or anything really. They will control virtually any accessory you throw at them. Besides the LED lights up at 3V with a rated voltage of 12V max so you can use it with lower voltages. Since there's an LED inside but with only 3 pins, it’s a little different to wire than most toggle switches. The anode ( positive side) of the LED is connected through a resistor to the pin with a 'headlamp' (=D) symbol on it.