In this tutorial, I will show you guys how I designed and assembled the humidifier circuit into the 3D model.

This is the reduced to the max case / housing / sleeve for the Raspberry Pi Zero (2 W) in the version without cooling (we have another model that is prepared for cooling), less is hard to imagine. A foldable print in place housing with live hinge that is less than 2mm bigger than the Raspberry itself. All interfaces are accessible and the board itself is covered and protected. Above that it prints as one piece, the assembly is easy and no tools or screws are needed. Just print (in less than an half an hour / under 15 minutes with input shaping) and use…

This is a simple bracket to mount N20 Micro Gear Motors on your robot's PCB or chassis

tiny LiDAR laser range finder ” anUltra Compact LiDAR Distance Meter/Range Finder

Stencil for painting walls

3d printing stencil for painting on the wall, cutting out...

Usable small case for Orange PI 3B board

I made a small project with LEDs and a MAX7219 matrix.

Electricity meter with touchscreen and remote access.

My curiosity to create something new and interesting got me into this gothic style rechargeable lantern. A Gothic Lantern is a captivating piece of lighting that brings the allure of the Victorian Era into your home.

Designing and building a 3D printer from scratch!

RaspberryPICO + PCM5100 Circuitpython

Buying a ready-made power supply would be too easy, so I decided to make my own.

Dragon stencil

A minimal, foldable print in place case / housing / sleeve for the Raspberry Pi Pico with live hinges

Exploring the digital twin synthetic data generation and AI-oriented advancements on real-world shipping operations w/ NVIDIA Omniverse.