Weather Crow is an ESP32-S3 based weather station featuring an E-paper display that shows current weather conditions and forecasts. This initial release provides a complete solution for monitoring local weather with minimal power consumption through efficient deep sleep cycles. the project is under the MIT license, so you can modify or chage as you want!!

Stack holder for pixhawk 2.4.8 with a raspberry pi4 on a QAV250 drone quadcopter frame

This project briefly describes how to digitalize analog water meters/other devices with display output only by utilizing Ai-On-The-Edge-Cam devboard. The board takes a picture of the old display, does image recognition and provides output to MQTT server via Wifi, Ethernet or via LoraWan(The Things Network).

This is the development kit using the Esp32-Wrover microcontroller that I designed.

Despite its simplicity, this Clock is fully functional, highly adjustable, and has the option of automatically setting the time via the Internet.

A replacement PCB for Hori Pad Mini controllers supporting software calibration & Hall Effect sensors.

eBUS Adapter Stick C6 is a reduced size version of previous highly demanded eBUS Adapter Shields and provides an interface to a 2-wire eBUS with galvanic isolation for enabling communication with an eBUS enabled heating, ventilation or solar system. With a size of 42 x 16 mm it is way smaller than the previous Shield versions, but still supports an USR-ES1 module being plugged onto it for having Ethernet access. Even better, with the upcoming firmware version for the ESP32-C6, it automatically scans the heating components and makes all data available via MQTT to e.g. Home Assistant with auto discovery of entities.

A research project on developing a full-fledged drive-through kiosk and food delivery system, utilizing LLMs to generate user-specific menus/deals.

An Arduino Mega–based robot plotter that uses DC motors with encoders, sensors, and G-code interpretation to accurately trace shapes, paths, and drawings. Designed as a low-cost, customizable platform combining robotics, automation, and creative design

A lightweight, 3D-printable PL camera case with snap-fit assembly and integrated cooling fins—designed for drones, IoT projects, and embedded vision systems.

Jinsonさん設計・頒布のバランスアンプ、Monyaca Fで簡単にDual-FETを使うためのアダプタ基板です。 This adapter board is intended for use with the Monyaca F, portable balanced amplifier, designed and distributed by Jinson-san. It simplifies the process of incorporating dual-FETs into the amplifier setup.

This project presents an IoT-Based Smart Energy Cost Monitoring System for Electric Motorcycles, designed to provide real-time insights into power consumption and operational costs as a sustainable alternative to fuel. The system is built around the ESP32 microcontroller, which serves as the core for data acquisition and wireless connectivity. Power usage is precisely measured using the HLW8012 energy metering sensor, while a 20x4 LCD display delivers instant on-device feedback for the user

A LoRa transceiver dongle is a compact USB device equipped with a LoRa (Long Range) radio communication module.

LR1262 Long-Range LoRa Wireless Transceiver with AVR32DA48 Microcontroller

R4TKN Deauther transforms the Ai-Thinker BW16 (RTL8720DN) into a dual-band 2.4/5 GHz Wi-Fi security lab tool, simulating disconnection events to audit and harden networks—featuring a portable, TFT-driven UI for authorized testing only.

An educational robot car that uses a mecanum wheel and is controlled with a PS3 controller!