lora gateway module with 1.8 lcd

LoRaWan Gateway Module Based on ESP32 with 1.8” LCD - 1 Channel for Long Range Communication (868Mhz/915Mhz)

LoRaWan Gateway Module+LR1262 Node Board+LR1262 Development Board Pack

was $63.39 Special Price $53.88
Availability: In stock
SKU
CRT01262M-CRT01269N-CRT01267D
Brand
elecrow
Weight
300g

This pack includes a LoRaWan Gateway module, an LR1262 Node Board, and an LR1262 Development board.

Description

This pack includes a LoRaWan Gateway module, an LR1262 Node Board, and an LR1262 Development board.

LoRaWan gateway module uses ESP32-WROOM-32 as the main controller, with Ra-01H module as the Lora RF transceiver module. It supports WiFi and Ethernet interfaces and can connect to the TTN backend network to enable gateway settings and data transmission monitoring.It supports Lorawan 1.0.3 and is compatible with other Lorawan sensors. 

LR1262 Node Board uses RP2040 as the main controller and LR1262 module provides LoRa transmission and reception functions. It supports LoRa point-to-point transparent transmission and LoRaWAN network. When combined with four types of Crowtail sensor modules (Ax2/Dx2/IICx1/UARTx1), it can quickly build a Lora node. 

Lora LR1262 development board uses RP2040 as the main control and is equipped with the LR1262 module that supports Lora and LoRaWAN protocols to help users realize development. The LR1262 Dev Board is an ultra-low remote transceiver module based on the STM32WLE5CC chip, specially designed for LoRa and LoRaWAN applications.

Lora gateway

 

LoRaWAN Gateway Specification

Main Processor Chip

ESP32 WROOM32 with dual-core 32-bit LX6 microprocessor from Xtensa @ 240MHz

LoRa RF transceiver module

RA-01H

RA-01H Supports frequency band

803MHZ-930MHZ

RA-01H Support modulation method

FSK、GFSK、MSK、LoRa

Channel

Single channel

Support Lorawan protocol

Support Lorawan 1.0.3

WiFi Antenna

SMA 2.4G WiFi Antenna

Communication distance

Obstructed state: up to 1 km

Unobstructed state: up to 1.8 kilometers

Development environment

Arduino/Micropython

Interface and function

1x USB-C interface,

1x Ethernet Interface,

1x Boot Button,

1x Reset Button,

2x Indicator Lights.

Working input voltage

USB DC-5V

Operating Temperature

-10°C ~ 65°C

Dimensions

65mm(L)x58mm(W)

 

LR1262 Node Board Specification

Main Chip

Raspberry Pi chip RP2040, built-in 264KB SRAM, onboard 4MB Flash

Processor

Dual Core Arm Cortex-M0+ @ 133MHz

LR1262 Supports frequency band

803MHZ-930MHZ

LR1262 Support Interface

IPEX first generation interface

Development environment

Arduino/Micropython

Interface

1x USB-C interface,

6x 5V Crowtail interfaces (2x analog interfaces, 2xdigital interfaces, 1xUART interfaces, 1xIIC interfaces)

2x10 universal GPIO interfaces

1xBattery Interface

1xSolar Interface

Working input voltage

USB 5V-1A

Dimensions

35mm(L)x50mm(W)

 

LR1262 Development Board Specification

Main Chip

Raspberry Pi chip RP2040, built-in 264KB SRAM, onboard 4MB Flash

Processor

Dual Core Arm Cortex-M0+ @ 133MHz

LR1262 Supports frequency band

803MHZ-930MHZ

LR1262 Support Interface

External antenna, SMA interface or IPEX first generation interface

LCD Display

Onboard 1.8-inch 128*160SPI-TFT-LCD

LCD Resolution

128*160

LCD Driver

ST7735S (4-wire SPI)

Development environment

Arduino/Micropython

Interface

1x RS485 communication interface,

8x 5V Crowtail interfaces (2x analog interfaces, 2xdigital interfaces, 2xUART interfaces, 2xIIC interfaces)

12x 5V universal pin header IO interfaces

14x 3.3V universal pin header IO interfaces

1x 3.3V/5V switchable SPI interface

1x 3.3V/5V switchable UART interface

3x 3.3V/5V switchable IIC interfaces

Buttons and functions

1x passive buzzer,

4x user-defined buttons,

6x programmable LEDs

Working input voltage

USB 5V-1A

Operating temperature

-10°C ~ 65°C

Dimensions

102mm(L)x76.5mm(W)

 

Package List

 

Write Your Own Review
You're reviewing:LoRaWan Gateway Module+LR1262 Node Board+LR1262 Development Board Pack
Your Rating