Currency
Toggle Nav
NanoVNA 6G vector network analyzer 50k-6.3GHz handheld portable network analyzer
$169.90
Availability:
In stock
SKU
DPI09601D
Weight
425g
【Network Analyzer】High-performance electronic test instrument for measuring and analyzing circuits and devices in the radio frequency (RF) and microwave bands.
【Wide frequency range】Supports a frequency range of 50KHz-6.3GHz, covering the radio frequency and microwave bands.
【Intuitive operation】4-inch touch screen, visual interface, simpler operation
【Multiple measurement modes】Support multiple measurement modes of S11 and S21
Description
This NanoVNA vector network analyzer is a powerful, portable, high-performance electronic test instrument used to measure and analyze circuits and devices in the radio frequency (RF) and microwave frequency bands. It uses advanced vector network analysis technology to accurately measure and analyze circuit transmission characteristics, reflection loss, impedance matching and other parameters.
NanoVNA has a small and lightweight design, making it easy to carry and use. It is equipped with a 4-inch 480*320 resolution LCD screen that intuitively displays measurement results and graphics, allowing users to quickly and accurately understand the performance of the circuit. At the same time, NanoVNA supports touch screen operation and an intuitive user interface, making operation simpler and more convenient. It has a built-in 2000mAh battery, which is convenient for outdoor use. With Micro SD card slot, supports Micro SD card storage.
NanoVNA has a wide range of applications. It can be used in the design and optimization of radio frequency circuits, helping engineers with impedance matching, filter design, antenna tuning, etc. In addition, NanoVNA is also suitable for education and research fields, helping students and researchers to deeply understand and explore the characteristics and performance of radio frequency and microwave circuits.
Feature
- Wide frequency range: Supports a frequency range of 50KHz-6.3GHz, covering both RF and microwave bands. This makes it suitable for various applications, including wireless communication, radar systems, and antenna design;
- Visual interface and intuitive operation: Equipped with a 4-inch touch screen, it provides an intuitive display of measurement results and user interface, enabling users to easily perform measurements and analysis;
- Accurate measurement and analysis capabilities with multiple measurement modes: It possesses high-precision measurement and analysis capabilities, accurately measuring circuit transmission characteristics, reflection loss, impedance matching, and other parameters. It supports multiple measurement modes for S11 and S21;
- Portable size: Compact and lightweight design, making it easy to carry and use. Its small form factor allows for convenient on-site testing and debugging without the need for large equipment.
Specification
|
Parameter |
Specification |
Conditions |
|
Frequency range |
50kHz ~ 6.3GHz |
|
|
System dynamic range |
>70dB >90dB(v0.3.1 20avg) |
f < 3GHz, calibrated |
|
>50dB |
f ≥ 3GHz, calibrated |
|
|
S11 noise floor |
<-50dB |
f <3GHz, calibrated |
|
<-40dB |
f ≥ 3GHz, calibrated |
|
|
Frequency stability |
<0.5ppm |
0℃ - 50℃ |
|
Sweep rate |
>550 points/s |
Avg=1 |
|
Sweep points (on device) |
21 ~ 1001 points, adjustable |
- |
|
Sweep points (USB) |
1 ~ 65535 points, adjustable |
|
|
Power supply |
USB, 5V±0.5V 1A MAX |
|
|
Battery |
Li-polymer 3.7V 2000mAh |
|
|
Operation ambient temperature |
-10℃ ~ 50℃ |
The battery performance decreases below 0 ℃. |
|
RF connectors |
SMA female |
|
|
Display |
4”TFT LCD (480×320) |
|
|
Touch Mode |
Resistive Touch |
|
|
Dimension Size |
132*75*18mm(W*L*H) |
|
|
Net weight |
163g |
|
Package List
- 1x NanoVNA Vector Network Analyzer
- 1x Type-C cable
- 1x Touch pick
- 2x SMA Extension Cable
- 1x SMA male calibration kit (OPEN / SHORT /LOAD)
- 1x SMA female to female connector
Wiki & External links
Write Your Own Review
Check items to add to the cart or
