This project aims to produce a fully assembled Meshtastic node based on the ESP32-S3 and RA-01SH, both of which are avaliable for assembly by JLCPCB. The only components to be bought outside are the antenna and LiPo battery. The PCB will include battery charging and SMA connector. Meshtastic® is a project that enables you to use inexpensive LoRa radios as a long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source! Meshtastic utilizes LoRa, a long-range radio protocol, which is widely accessible in most regions without the need for additional licenses or certifications, unlike HAM radio operations. These radios are designed to rebroadcast messages they receive, forming a mesh network. This setup ensures that every group member, including those at the furthest distance, can receive messages. Additionally, Meshtastic radios can be paired with a single phone, allowing friends

Expansion board for ESP32 boards.

In the year 2021 I created a "Internet Hardware WatchDog" using NodeMCU which reboots my home router whenever there is an issue with the Internet. This device sits next to my router and happily takes care of it whenever it has a hiccup. This year, I wanted to extend the watchdogs horizon by adding an "Internet Status Notifier" that displays the current status of the Internet using an RGB LED.

Create a custom ESPHome dashboard for your smart home setup with the help of CrowPanel 7" HMI Display

This is a 10 channel spectrum analyzer with a antique look that can easily be modified to fit a steampunk NIXIE theme.

Provide to your favourites green friends with a DIY pot that let you know their needs!

This is a visually impressive hourglass simulation project, and despite its simplicity, there are many possibilities for modifying most parameters.

Make a FilamentCase!! IoT FlamentCase!!

This is certainly the simplest and cheapest object detection system that can serve perfectly for the presentation of the possibilities of this technology.

eBUS Adapter Stick C6 is a reduced size version of previous highly demanded eBUS Adapter Shields and provides an interface to a 2-wire eBUS with galvanic isolation for enabling communication with an eBUS enabled heating, ventilation or solar system. With a size of 42 x 16 mm it is way smaller than the previous Shield versions, but still supports an USR-ES1 module being plugged onto it for having Ethernet access. Even better, with the upcoming firmware version for the ESP32-C6, it automatically scans the heating components and makes all data available via MQTT to e.g. Home Assistant with auto discovery of entities.

H2S-Dev board is a ready-to-use, Open source hardware, Arduino compatible, LoRaWAN Helium network sensor development board. It is capable of implementing a number of sensor (Basic and Full variant) and positioning applications (Full variant only). The board is mainly targeted to makers and hobbyists.

Never Lose Power Again — Real-Time Energy Monitoring Made Easy

This is an extremely simple way to make this fun puzzle game, which only requires three components, and will provide you with many hours of fun.

RGB Control System With ESP32-C6