Identify noxious air bubbles lurking in the substrate w/ ultrasonic scans and assess water pollution based on chemical tests simultaneously.

Weather Crow is an ESP32-S3 based weather station featuring an E-paper display that shows current weather conditions and forecasts. This initial release provides a complete solution for monitoring local weather with minimal power consumption through efficient deep sleep cycles. the project is under the MIT license, so you can modify or chage as you want!!

A ready-to-use weather station. Quick setup: flash the prebuilt firmware and start testing in under a minute, no coding required. Open-source and customizable for your own weather-based projects. Firmware and source code available on GitHub.

Build the ESP-FLY, a tiny, phone-controlled ESP32 pocket drone powerful enough to fly indoors & outdoors!

Automatische Bewässerungssteuerung für bis zu 4 Pflanzen mit ESP8266 und Home Assistant Integration. ✅ 4x Kapazitive Bodenfeuchte-Sensoren (korrosionsbeständig) ✅ 4x Pumpen mit individueller Steuerung ✅ Wassertank-Füllstandsüberwachung mit Schwimmer ✅ 2x Hardware-Buttons für Standalone-Betrieb Betriebsmodi: • AUTO: Kontinuierliche Überwachung, automatisches Bewässern bei Bedarf • MANUELL: Pumpensteuerung über Schalter • NOTAUS: Automatisch bei leerem Tank Sicherheit: • Interlock - nur 1 Pumpe gleichzeitig aktiv • Timeout-Schutz gegen Überflutung • Keine Pumpenaktivierung ohne Wasser Alle Parameter über Home Assistant einstellbar (Schwellenwerte, Bewässerungsdauer, Intervalle). Komplette Logik läuft auf dem ESP - keine HA-Automationen erforderlich. Hardware: ESP-01, MCP23017, ADS1115, MOSFETs PCB: 2-Layer, 97x76mm, komplett Open Source

The DIY Heating Booster helps you get more out of your existing radiator – without modifying your heating system. An ESP32 controls 12V fans mounted underneath the radiator, automatically turning them on when the radiator gets warm to efficiently distribute heat throughout the room. The control logic works standalone with a local temperature sensor, but can also be fully integrated into Home Assistant. Perfect for cold spots, smart upgrades, and energy-saving DIY solutions.

A wearable Sign Language Translator powered by the VIAM and Raspberry Pi

WiFi-Enabled, modular prototyping platform for creating and testing electronics projects with ease.

Effortlessly monitor your home's energy consumption with the DIY Smart Powermeter, seamlessly integrated with the user-friendly Home Assistant platform. This powerful project provides real-time data on your household's energy usage and offers the added convenience of a snapshot of your grid's status whenever you open the electric closet, thanks to the 2.9' e-paper display. Featuring an integrated 230VAC to 5VDC regulator, the ESP32-S2 efficiently harnesses power from surrounding wires for optimal performance. The Smart Powermeter supports up to six different CT clamps, with or without a burden resistor, allowing for versatile monitoring options. Additionally, it can measure ambient temperature, giving you comprehensive insights into your energy consumption and surroundings.

In the year 2021 I created a "Internet Hardware WatchDog" using NodeMCU which reboots my home router whenever there is an issue with the Internet. This device sits next to my router and happily takes care of it whenever it has a hiccup. This year, I wanted to extend the watchdogs horizon by adding an "Internet Status Notifier" that displays the current status of the Internet using an RGB LED.

This project demonstrates real time Machine Learning on the edge by evaluating hand drawn digits on an ESP32 P4 touch display using a custom quantized PyTorch neural network.