Screw Shield

SKU
MCS01110
Weight
33
In stock
$4.50
-
+
Overview
The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.

    The Screw Shield extends all pins of the Arduino out to 3.5mm pitch screw terminals. It also has a lot of the utility provided by Arduino Protoshield, including: a large prototyping space of both connected and unconnected 0.1" spaced through-holes, a couple 5V and GND busses, a reset button, and a 5mm green LED.

    The Screw terminal can be screwed directly to the terminal on the thread and is reliable and convenient. It can be plugged into the Arduino controller. You can use this shield to save yourself from the bad port connection. Feel secure with this arduino-compatible screw shield.

    In the case that you have a breadboard, the shield do not ship with breadboard. The best suitable breadboard is Basic Bread Board With Slot - 16.5*5.5 cm.

Package list

  • Arduino Proto Shield PCBA x1;

External link&Wiki

Write Your Own Review
You're reviewing:Screw Shield
Your Rating