The B3603 DC-DC Digital Control Step-down Module is a digital control and digital display step-down module, it has small volume, high power, high efficiency and works steady. It controlled by high speed micro controller, and the output voltage and current can be adjusted accurately. There are also 10 groups of storage space, which be used to store and bring up the parameters at any time. This module is equipped with four 8-segment LED digital tube, which can display voltage, current, power, capacity and other parameters real-time.
Digital display, convenient and easy to use.
Constant voltage and constant current state.
OUT,CV and CC indicator light.
Adjust output voltage and current value accurately.
Automatic/manual switch voltage, current, power, capacity and other parameters display.
It can be set whether automatically output or not after electrify.
It can be set whether take turns to show voltage, current, power and capacity or not after output.
10 groups of storage location, free storage and bring up.
One key to save voltage and current value
Input voltage: 6V ~ 40V
Output voltage: 0 ~ 36V
Output current: 0 ~ 3A
Voltage regulation/display resolution: 0.01 V
Current regulation/display resolution: 0.001 A
The minimum display resolution of power: 0.001 W
The minimum display resolution of capacity: 0.001 AH
Conversion efficiency: up to 92%
The output ripple: ≦50 mV
Working temperature: - 40~ + 85 degrees
Working frequency:150 KHz
Short circuit protection:Constant current
Input reverse connect protection:No, if necessary please install diode