The Crowduino is Arduino compatible board. Based on Arduino Duemilanove Schematic, 100% compatible to its existing program, shield and IDEs.

This Crowduino is a microcontroller board based on the ATmega328 ( datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, a reset button, and a XBee socket. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The difference between Crowduino and other arduino compatible is the Crowduino contains a XBee socket . This feature make Crowduino not only adapts to all the shield that compatible with arduino Uno, but also adapts to the Xbee modules from Digi, and any module with the same footprint.

Features

Wireless programming
With a Xbee socket so that you don’t need to buy other Xbee extend shield
Flat DC Jack
Inherits all of Arduino-comaptible Duemilanuve's features, 100% compatible to its existing program, shield and IDEs.
Compatible with Uno's pin layout, screw hole and dimensions.
Evolved with SMD components.

Specification

Microcontroller	ATmega328
Operating Voltage	5V
Input Voltage (recommended)	7-12V
Input Voltage (limits)	6-20V
Digital I/O Pins	14
PWM Channels	6
Analog Input Pins	8
DC Current per I/O Pin	40 mA
DC Current for 3.3V Pin	50 mA
Flash Memory	32 KB (ATmega328) of which 0.5 KB used by bootloader
SRAM	2 KB (ATmega328)
EEPROM	1 KB (ATmega328)
Clock Speed	16 MHz