【2.2-inch color screen】Supports 65K color display, rich display colors, 320X240 resolution, clear display
【Easy to use】Using SPI serial bus, only a few IOs are needed to light up the display
【SD card slot】Experiments can be easily expanded through the SD card slot
【Stable work for a long time】
2.2-inch color screen, support 65K color display, display rich colors
320X240 resolution, clear display
Using the SPI serial bus, it only takes a few IOs to illuminate the display
Easy to expand the experiment with an SD card slot
Provide a rich sample program
Military-grade process standards, long-term stable work
Provide underlying driver technical support
| Name | Parameter |
| Display Color | RGB 65K color |
| SKU | MSP2202 |
| Screen Size | 2.2(inch) |
| Type | TFT |
| Driver IC | ILI9341 |
| Resolution | 320*240 (Pixel) |
| Module Interface | 4-wire SPI interface |
| Active Area (AA area) | 33.84x45.12(mm) |
| Module PCB Size | 40.10x67.20(mm) |
| Operating Temperature | -20℃~60℃ |
| Storage Temperature | -30℃~70℃ |
| VCC power voltage | 3.3V~5V |
| Logic IO port voltage | 3.3V(TTL) |
| Power Consumption | TBD |
| Rough Weight(Package containing) | 22(g) |
| Number | Pin Label | Description |
| 1 | VCC | 5V/3.3V power input |
| 2 | GND | Ground |
| 3 | CS | LCD chip select signal, low level enable |
| 4 | RESET | LCD reset signal, low level reset |
| 5 | DC/RS | LCD register / data selection signal,
high level: register, low level: data |
| 6 | SDI/MOSI | SPI bus write data signal |
| 7 | SCK | SPI bus clock signal |
| 8 | LED | Backlight control, high level lighting,
if not controlled, connect 3.3V always bright |
| 9 | SDO/MISO | SPI bus read data signal, if you do not need the read function, you can not connect it |