Create a wheeled robot based on Visual SLAM technology powered by Radxa X4 N100 Board, Realsense D435i camera, Intel Robotics SDK software.

XRC PRO is a powerful, open-source RC transmitter and receiver system using STM32 and NRF24L01. It features real-time control.

The Quadcopter Y1101 is a 3D SolidWorks–modeled, high-aerodynamic-resistance racing drone designed for precision, speed, and stability. This project merges simulation-driven design with hands-on fabrication, using 6-inch NACA-M18 propeller blades to maximize lift efficiency and maintain stability at high flight velocities. However, the blade design is fully parametric and customizable, meaning the propeller geometry can be modified or redesigned based on the research methodology being pursued. This allows engineers and researchers to explore performance variations across different airfoil profiles, pitch angles, and chord lengths, enabling targeted optimization for speed, stability, and flight precision in both racing and research applications. The Y1101 was created as a 3D-printable prototype platform for testing aerodynamic performance and control algorithms, bridging the gap between simulation-based design and real-world racing drone prototyping.

Project #12: Robotics - L298N DC Motor Driver - Mk33

Go forward, move ahead - VoxControl v.2 makes them all work - powered by state-of-the-art recognition on ESP32-S3

A cheap, fully 3D-printed, Raspberry Pi Zero 2 W–driven robot dog with 14 DOF that actually walks, trots, and looks around on a wide-angle camera, built entirely from off-the-shelf parts and a lot of trial, error and swearing.

A single board arduino nano controlled DCC accessory decoder for control of upto 16 servos with led output indication.

The system presented in this proposal is referred to as SPL, Static Pressure Launch, a compact and passive ejection mechanism designed to harness environmental pressure differentials for reliable high-altitude capsule release and safe ground handling.

Build the ESP-FLY, a tiny, phone-controlled ESP32 pocket drone powerful enough to fly indoors & outdoors!

The ultimate robotic 'Swiss Army knife' for Raspberry Pi Zero 2 W. Meet a powerhouse 32-channel servo controller featuring an ultra-robust 3x 5A power delivery system, built-in 6-axis IMU, and RTC. Say goodbye to brownouts and cable clutter, and easily drive power-hungry hexapods, quadrupeds, or animatronics from a single, compact board.

The Self-Balancing Robot is a two-wheeled mobile robot that uses control theory and sensor feedback to maintain its balance, similar to how humans balance on two legs. It demonstrates fundamental principles of robotics, mechatronics, and control engineering. This project is designed as an educational tool to learn about sensors, actuators, control algorithms, and embedded systems.

ZoeTheRobot runs a home made custom chat bot that allows her to answer questions and follow spoken commands.

Voice and Movement Combined in a Simple Game to Train Coordination and Speech

This is certainly the simplest and cheapest object detection system that can serve perfectly for the presentation of the possibilities of this technology.

Project #12: Robotics - 4WD Robot Car - Mk34

Build a miniature DIY FPV drone that operates fully on Arduino hardware for a fun learning experience and thrilling living room racing.