Recent Feedbacks
-
G*****
Very good quality PCB'sAs usual, good quality PCB's and quite fast production. Also, the technicians check the design very well and point out any anomaly or short circuit they can detect. The final result is a working design. Shipment is efficient and the "standard" PCB's of 100 x 100mm fit through my letter box. This is convenient for delivery. So all in all, I'm a happy customer.Jul 10,2025 -
-
M*****
Very good acrylic panelsThe acrylic panels are produced as my design that shows transparent and black 2mm thickness panels. Everything is no problem. Also it took just one week to receive the panels after placing order. It is very fast.
Jul 07,2025 -
-
J*****
S88Jul 03,2025 -
-
K*****Just as orderedI ordered two M1 units to go down the meshtastic/MeshCore rabbit hole and so far so good. Radios linked (at -14.25dB) through 2km of trees over flat ground. I can't wait to get one of these running on solar on a hilltop in dedicated repeater mode.
Jul 01,2025 -
-
P*****
As always high qality!I am a regular customer and it is always excellent!
Jun 30,2025 -
-
s*****
la taille qui convien !j'ai acheter un module adv 3.5 panel avec module lora 868mhz ajouter une antenne ipex 868mhz soudé les pin et tout est bien j'ai flasher le nouveau firmware meshtastic pour adv et Mui c'est a mon gout probablement un des meilleur module pour meshtastic a la maison ! je vais le fixer au mur , et j'ai deja comandé un autre module en 7p pour tester le plus gros :) est arrivé en 1 semaine merci
Jun 28,2025 -
-
K*****
Elecrow Stickergood item
Jun 27,2025 -
-
B*****
Great service. High quality!Great interaction with Elecrow fellows! High quality PCBA. Seamless component sourcing. Will interact for future projects.
Jun 26,2025 -
-
R*****Superb service ????This is only the second time that I have ordered PCB's from Elecrow, the first time was many years ago and the servic was faultless. Once again Elecrow have produced a superb pcb at very low cost and got it to me half way across the world in no time. Thanks once again ????Jul 09,2025
-
-
g*****An innovative and exciting productThe hackberry CM5 is a portable and exciting gadget for Linux lovers and raspberry pi tinkers who wish to carry their favourite small gadget in a pocket so they can tinker and create projects on the move..it is an innovative product as their aren't many examples of small handheld that run a pc operating system that isn't a smart phone..I am extremely happy with my purchaseJul 06,2025
-
-
N*****
Good qualityEverything worked fine. I'm very satisfied.Jul 03,2025
-
-
S*****
PCB AssembleI asked them to implement a new product and write the MCU. This time, I had Elecrow provide all the parts. Sending parts from Japan would cost shipping and go through customs, so it was very helpful that they arranged for the parts. They also wrote the MCU for me, which was also very helpful.
Jul 01,2025 -
-
J*****
Excellent pcb assembly at a great price.We have ordered many times from Elecrow and always experience excellent service and pricing. Their assembly service is excellent and they are very flexible on parts procurement (an area we had issues with other providers). Our account rep is on top of everything and handles all of our requests with ease. Overall they have been a great partner.Jun 30,2025 -
-
s*****
rapideadv 2.4 recu rapidement pour meshtastic module lora 868 j'ai peu instaler directement le firmware avec le flasher web , le firmware est tous nouveau ! tout fonctionne a merveille c'est module on un potentiel fous j'ai aussi acheté un autre je vous conseil de prendre le 5pouce ou 4.. c'est parfait prenez le boite avec et oublié pas de prendre le module lora et une antenne ipex 868 mhz ! je pence que je vais en metre partous :)
Jun 28,2025 -
-
K*****
USB to PH2.0 Extension Cablegood item
Jun 27,2025 -
-
D*****
incorrect PCB thicknessThe boards are done with high quality however one of the boards was ordered as 0.8mm but the board we got was 0.6mm which made it unusable for our applicationJun 26,2025 -
-
Y*****
Good qualityAs always the production quality was good and the boards worked as expected. All fully assembled and made as requested.
Jul 08,2025 -
-
M*****
Another excellent 2 layer PCBThe PCB was professional manufactured with vias and platings flawless. All the PCB's that Elecrow have manufactured for me have been mainly for RF circuitry, the latest a 6 way PA output filter. The associated PCB losses have been surprisingly low. I would have added pictures before and after assembly but the website rejects them all.Jul 05,2025 -
-
A*****
My Dream DeviceAwesome Device. I will use it to connect to other devices for troubleshooting, On site development/bug fixes, mobile remote desktop/ssh client, remote compiling. It will become a productivity beast for me. I may use it as my main PC (seriously), I already prepared docking station, monitor, Bluetooth keyboard/mouse in my workbench lol. My laptop will becoming my second mobile computer, mainly only for on the road bigger coding/development, design & video editing.
Jul 02,2025 -
-
S*****
CPU Education BoardI asked them to implement a CPU learning board. To keep costs down, they researched inexpensive LCDs in advance and created a board to match. Thanks to them, we were able to create it very cheaply, and I'm very pleased.
Jul 01,2025 -
-
M*****
Great turnaround !Our adaptor boards were built and assembled in a very reasonable time ! We received them and they work perfectly, as intended. Thank you Elecrow, and thank you Leah !
Jun 30,2025 -
-
G*****
Very good quality PCB's. Again and again.Not as common as you might think. The PCB's are of very good quality and look great. The one I've tested work as they should. And no, I have not tested all of them, as there are 147 individual units per 100 x 100 mm surface. And 10 of those. This means that I can put led-lights in 735 N-gauge locomotives. Enough for all members of our club and "a few" to spare for others. This would have been possible without Elecrow. So I'm a happy customer and will gradly return.Jun 28,2025
-
-
H*****
Excellent PerformanceTis time I ordered a pcb with smd parts and asked for a panesitation. and a stencil. All of it was made in perfect quality and time.
Jun 27,2025 -
-
G*****
Nice PCBThe finished product quality is great. I can try to build my own keyboard now! gerber downloaded from github, named su120
Jun 26,2025 -
-
T*****Outstanding service and support from Leah!I am extremely satisfied with the outstanding support and professionalism that Leah has shown throughout our collaboration. From the very first inquiry to the final delivery of both components and PCB/PCBA, her communication has been timely, clear, and solution-oriented. She always ensured that every detail was double-checked, proactively updated me on progress, and followed through after the order to ensure I was happy with the results. Leah demonstrated not only technical competence but also a genuine customer-first attitude that made the whole experience smooth and trustworthy. Thanks to her, I felt confident and well taken care of at every step. This level of commitment is rare and deeply appreciated. I look forward to continuing working with her and the team on future projects. Highly recommended! – Thorbjörn GeiserJul 08,2025
-
-
J*****
Perfect!I needed a couple of PCBs for a project. Elecrow did a fantastic job for me. The PCBs are very well finished and exceed my expectations. Thank you. JerryJul 05,2025
-
-
A*****
NiceNice sparepartJul 02,2025
-
-
S*****
Component mountingI requested the implementation of a small CPU board. The board has a pin header, and I was worried that the pins might be bent, but they were firmly supported with urethane and carefully packed one by one, so I had no worries at all.
Jul 01,2025 -
-
B*****
Always considerate and helpfulWorked with Elecrow for some time already. For this PCB we had a hard deadline and Leah could push the project through and deliver the boards in time for our testing process. Very satisfied with the quality of the boards, attention to detail and customer care.Jun 30,2025
-
-
H*****
Very GoodAs always, it was a good deal.Jun 28,2025
-
-
S*****
Edgeberry Zero release-ready!Once again, Elecrow delivered on its turnkey manufacturing promise with the Edgeberry Zero. From PCBA to info card and stickers!
Jun 27,2025 -
-
M*****
Very Good Acrylic PanelsThank you for your manufacturing. Everything is good. The acrylic panels are made perfectly as my expectation. Also the delivery is rapid. It took only 12 days to receive the products from my placing order.
Jun 26,2025 -
-
H*****
great cost performacnewhen you make a stainless 3d printing, it is the best choice for test and final check. it seems little a bit expensive, but I will order again.Jul 08,2025
-
-
C*****
Excellent quality, as alwaysA friend told me about Elecrow several years ago. I'm very pleased that he did. I have now been using this fantastic service for several years and the quality of the PCBs has remained very high. How you do it at the price, I do not. Value for money? YES. Thanks for your service.Jul 04,2025
-
-
A*****
nice little partsNice little sparepart for hackberryJul 02,2025
-
-
S*****
Writing PIC ProgramUsually, I only ask them to mount the board and write the PIC program in-house, but this time I asked them to also do the programming. There were no problems with writing, and they also did a simple test, which was very helpful. The cost was reasonable and the results were satisfactory. I'll be sure to ask them again for the next lot.
Jul 01,2025 -
-
E*****
Hackberry w2Just got the hackberry in everything is here ( no sticker( xD but it powered on haven't really had Time to mess with it yet but I'm definitely excitedJun 29,2025
-
-
S*****
Good Job ElecrowGood support from Elecrow to get the board in production. Wishlist: See the estimated date when all parts sourced.Jun 27,2025
-
-
M*****
Great productIt uses the ESP32-C6 which took some work with platformio, ended up with pioarduino and everything working as expected. The product is fantastic and a great addition to our Caravan for security when are away and peace of mind with regards to co2 and other containment should they be a problem.Jun 27,2025 -
-
K*****
Super snelle leveringEcht een aanrader de levering ging heel snel zelf binnen de aangegeven tijd. zekre aan te raden om hier te bestellen. de verpakking was ook goed.Jun 25,2025
-
-
H*****
good 3d printfast and low price test 3d printing. in case of large size, you should design to prevent distortion. I will re-order next time.Jul 08,2025
-
-
J*****
Návěstidla DCCPerfektní prácem dokonalé spojeJul 04,2025
-
-
A*****
Nice displayNice display for raspberry & great cheap replacement for hackberryJul 02,2025
-
-
t*****makotoNo issues at all! The silkscreen looks nice and clean — very satisfied. If the shipping is always this quick, it's a total win.
Jul 01,2025 -
-
D*****
Gutes Preis LeistungsverhältinissDir Lieferung nach Deutschland hat zwar ein wenig gedauert, aber dafür habe ich mehr Platinen bekommen als ich bestellt habe und das zu einem sehr günstigen Preis. Es wäre noch schön, wenn man den aktuellen Status besser einsehen kann. Wenn die Preise so gut bleiben, werde ich wohl wieder Platinen bestellen, wenn ich Bedarf habe.Jun 29,2025
-
-
K*****
pcb ch59d modulgood service,price,quality...
Jun 27,2025 -
-
M*****
Good job!Very fast delivery. Well packed package. Good job!Jun 27,2025 -
-
C*****
Perfect boardsElecrow PCB Production Review for DFB1X Atari Falcon Accelerator Elecrow has delivered outstanding PCB manufacturing for the DFB1X Atari Falcon Accelerator, as showcased on the Exxos Atari Forum (https://www.exxosforum.co.uk/atari/last/DFB1X/index.htm). Their high-quality production ensures precision in crafting the multi-layer PCB, which supports a 50MHz 68030 CPU and 128MB of TT-RAM. Elecrow’s rigorous quality control results in defect-free boards, thoroughly tested for stability and performance. Offering both fully assembled and barebones options, they cater to the retro computing community’s diverse needs while keeping costs low. The clean PCB layout simplifies user modifications, and community feedback praises Elecrow’s reliability. I highly recommend Elecrow for specialized PCB projects, earning them a 5/5 rating.
Jun 25,2025 -
-
H*****
fast pcbI always order elecrow. because fast and low price. thank you very much for your products. I will re-order when I make a PCB.Jul 08,2025
-
-
S*****
Excellent Quality and ServiceExcellent service, Leah was more than helpful to make this product and work through some technical questions. Would recommend Elecrow for other projects.
Jul 04,2025 -
-
M*****
Fast PCB DeliveryMy PCB for a LCD adapter (including optional key buttons).
Jul 02,2025 -
-
R*****
Very good qualityWe have had several projects manufactured by Elecrow in the last few years. They were always perfect. Communication was excellent in case there were questions about our parts list, the PCB or other issues.
Jun 30,2025 -
-
E*****
Elecrow review for the Zitaotech HBP CM5Good day. I just received my Hacberrypi CM5. I got scared a little for the box was smashed but wasn’t open it’s just a typical package. But good thing the item I ordered came in with a soft/hard case so it’s well protected. I got no complain just telling everybody what I received. I believed it’s a transportation issue but like what I said item is okay. Thanks again.Jun 29,2025
-
-
K*****
Elecrow Tale Markergood item
Jun 27,2025 -
-
R*****Less than a week turnaround time!We've been with Elecrow for nearly 9 years, and have consistently had nothing but great boards from them. This was no different! Six designs, turned around in less than a week from the time I ordered to the time I received it? Amazing!Jun 27,2025
-
-
E*****
Great serviceI've placed several PCB orders, and each time the results have been great. The board quality is consistently excellent, with precise manufacturing and clean workmanship. What really impresses me is the quick turnaround—every delivery has been faster than anticipated. A dependable supplier I’ll gladly continue using!Jun 25,2025
-
-
A*****
Good ProduktTopJul 07,2025
-
-
L*****
Great service and great product (Hackberry Pi)Jul 03,2025 -
-
K*****
Very goodI received my merchandises on time. and there were no problem.Jul 02,2025
-
-
P*****
A great things!I am a regular customer and it is always excellent!
Jun 30,2025 -
-
C*****
Very Nice ScreenI just received the 2.8" screen I ordered and it is very nice. It looks high quality. Also they shipped it right away and it got here really fast. I am very impressed with the quality and great support this company provides. I will be buying from them again.Jun 28,2025
-
-
K*****
Elecrow Erasergood item
Jun 27,2025 -
-
D*****Perfect!Fast Delivery, good quality. Easy to InstallJun 26,2025
-
-
V*****
Stainless steel + high accuracy polishingGreat customer service as usual ! Thanks a lot Apple :) The production was perfect with very good finition.Jun 24,2025
-