ESP32-RF DIY-PCB

Description:

The ESP32-RF DIY-PCB is a plain PCB for development with possibilities to solder hardware onto, like an ESP32-wroom-32U or wroom-32E DevKitC 38Pin.
There are also 2 nRF24 module pin-holes that can be added and turned on/off seperately.
In addition you can use a I2C 0.96" OLED display to do even more experimenting on creating cool projects!
To indicate the power status, there is a POWER LED, also a RF LED to indicate whether the RF modules are being powered or not and the 3rd is a STATUS LED with space for a resistor before each, which can be used to show diffrent states of a process etc.
A TP4056 charging module together with a JST PH2 connector can be added to make your projects portable and use them wherever you like, by simply attaching a battery to it.
To turn on the battery power, you can add a slide switch for that, aswell as for both RF modules, you would need a switch to control their power.

Overall it's a DIY-PCB that guarantees plenty of possibilities to have fun and try working on either single hardware or more embedded hardware like both nRF24 modules!

Included:

PCB ONLY!

NO EXTERNAL HARDWARE!