There is no guarantee that Upsy Desky is fit for your specific purpose or that it will work with your desk's control box due to the large number of different standing desk models out there. Since this is a product of reverse engineering, there is no way to be 100% certain that a desk model will or won't work without testing it yourself.
A list of control box models which community members have tested is available here. While the existence of your control box on this list significantly increases the likelihood that it will work, it's not guaranteed since manufacturers may silently make revisions or other incompatible changes while keeping the same model number.
You should understand this risk before purchasing. It is your responsibility to read the documentation to determine whether or not Upsy Desky may be fit for your purpose. If you have any questions, please contact me and I will be happy to help!
In a nutshell...
As with the original version of this product, it can connect your motorized standing desk to your home automation system. It can read your desk's current height, and set it as well. This lets you create automations that integrate with your desk, for example:
If you're sitting for too long, raise desk to standing height
When you leave home, raise desk to max height so the cat can't knock things over
Have an infinite number of presets for everyone in your household
Send desk height data to InfluxDB to analyze how often you're sitting vs. standing
Or whatever else you'd like. The possibilities are endless! As long as the possibilities involve a standing desk.
This project is fully open-source. If you would like to modify the design or get your own boards fabricated, head to the GitHub repo. You'll find everything you need there.
Runtime firmware configuration -- no more manual flashing or compiling ESPHome to change stuff
Improved enclosure design with a more snug fit and screw-mounted PCB, allowing for easier repairs and troubleshooting
Replacing the D1 Mini with an ESP32-WROOM module, providing hardware UART for more reliable desk connection
A catchier name, because "WiFi Standing Desk Controller" was a mouthful
This revision also fixes some annoying issues from the first version, such as the desk sometimes lowering on startup, or simply not powering at all without a hacky workaround.
Compatibility
Any standing desk that uses RJ45 to connect to the keypad is likely compatible, but the brands of desks specified on this page have been verified to work properly.
In the box
3D printed enclosure
Pre-Assembled PCB
You will need
Short, high-quality RJ45 patch cable (such as this one)
Resources
In addition to the documentation, you can also join the Discord if you have any questions or need support. I do my best to respond as quickly as possible there