This is an excellent mini IPS screen 7 inch HDMI monitor with a special design for Raspberry Pi. Easily mount your Raspberry Pi on the back of the monitor with the accessories included in the box. Thanks to the mini size and easy-install bracket stick, it makes this monitor a simple on-the-go setup.
It supports HD 1024x600 resolution, and IPS monitors help keep colors consistent at a wide viewing angle. It features an OSD adjustment function that can easily adjust the brightness /VOLUNM / contrast /saturation /language, etc. With built-in speakers, this small monitor enhances your audiovisual experiences.
With a capacitive USB touchscreen, Simply power the USB touch port to achieve touch function, and no need to install the driver, just plug and play! When used as a computer monitor, it supports Win10/8/7, a five-point touch. When working with Raspberry Pi, it supports Raspbian, Ubuntu, and WIN10 IoT,a single touch.
Broadly you can use it with your Raspberry Pi 4/3/2, Windows PC, TV, or video game console like Nintendo Switch/XBOX/PS4.
*When working with Raspberry Pi 4, for the system image of Raspberry Pi after 2021-10-30, for example on Bullseye, please modify "dtoverlay = vc4-kms-v3d" to "dtoverlay = vc4-fkms-v3d" in the config file, otherwise it may fail to start. But on Buster, please comment out "dtoverlay = vc4-fkms-V3D" by adding #.
With 1024×600 high resolution
With capacitive touch control, plug and play, no driver is needed
HDMI interface for displaying, USB interface for touch control
Backlight control to lower power consumption
Supports Raspberry Pi, comes with Raspbian driver and Ubuntu image
Not only for mini-PCs, but it can also work as a computer monitor just like any other general HDMI screen (touch function is unavailable in this case)
Size: 7 Inch
Display Type: IPS
Touch: Capacitive Touchscreen
Screen Dimension: 154 x 86mm
Appearance Dimension: 179 x 125 x 23.2mm
Panel Weight: 296g
Product Weight: 380g
Package Weight: 470g
1* 7-inch Touchscreen Monitor
1* Bracket Stick
1* HDMI to Micro HDMI Cable
1* HDMI to HDMI Cable
1* Micro USB to USB Cable
1* Acrylic Board x1
2* M4*5 Screws (to mount acrylic board)
4* Copper Pillars (to support RPI)
4* M2.5*5 Screws (to mount RPI)