Holiday Notice: Elecrow staff will be on holiday starting October 1st (GMT+8). PCB & PCBA orders will resume delivery from Oct. 4th, and Product orders from Oct. 7th. Orders can still be placed as usual. Enjoy the holidays!
【ESP32 WROOM 32 chip】with Xtensa dual-core 32-bit LX6 microprocessor, better performance;
【RA-01H module】Module supports frequency band: 803MHz - 930MHz;
【1.8-inch screen】128*160 SPI-TFT-LCD, ST7735S driver chip;
【Compatibility】Compatible with Arduino and Micropython, convenient for developers to develop secondary;
【Wireless connection】Support ESP32 WIFI network connection, also supports Ethernet connection.
LoRaWan technology is a new and increasingly in-demand technology that has been widely applied in the field of the Internet of Things, especially in the industrial and agricultural sectors. This latest design of a single-channel gateway is the best initial device choice for learning and accessing Lorawan networks. It is designed to provide internet connectivity for our Lora series products.
It uses ESP32-WROOM-32 as the main controller, with Ra-01H module as the Lora RF transceiver module, and has two firmware versions available for different frequency bands (868MHz and 915MHz). The ESP-WROOM-32 itself supports WiFi and Ethernet interfaces and can connect to the TTN backend network to enable gateway settings and data transmission monitoring.
It supports Lorawan 1.0.3 and is compatible with other Lorawan sensors. When combined with sensor nodes and The Things Network cloud control panel, it can form a complete Lorawan sensor acquisition system.
In addition, we have equipped it with a 1.8-inch resistive touch screen with a resolution of 128x160, which uses an SPI interface. With this touch screen, it is more convenient to observe the gateway's data transmission status, check the IP data obtained by the gateway, etc. This module is powered and programmed through a Type-C interface, and it also has red and blue indicator lights showing its working and data transmission status. Equipped with the 2.5Dbi antenna, it can achieve a communication distance of up to 1.5km in unobstructed and interference-free environments. Even in urban areas, the farthest distance can reach 0.7 km. Replacing the antenna with a higher gain one can achieve even longer communication distances. This device comes with an acrylic shell that not only has a small and exquisite design but also serves as a protective cover.
LoRaWan Gateway Module can be used with LoRa node modules, LoRa development boards, and other devices to build a LoRa WAN IoT network, providing a reliable communication solution for applications in smart homes, industry, and agriculture control, among others.
Name |
Definition |
PWR |
Red power indicator light, always on when powered on, off when powered off |
DATA |
Blue data indicator light, flashing when data is being sent and received, and off by default |
RESET |
Reset button. Press this button to reset the system. |
BOOT |
Download button, hold down the Boot button, and press the RESET button to start the firmware download mode. Users can download firmware through the USB interface |
USB-C |
USB-C interface, which is used as the power supply of the gateway module and the communication interface between the PC and ESP32 |
WIFI |
ESP32 2.4G WIFI antenna SMA interface |
LORA |
868MHZ/915MHZ LORA antenna SMA interface |
Ethernet |
100Mbps Ethernet RJ45 interface |
IO port definition
GPIO0 |
BOOT |
GPIO1 |
TXD0 |
GPIO2 |
RXD0 |
GPIO3 |
RXD0 |
GPIO4 |
LCD_DC |
GPIO5 |
DATA |
GPIO6 |
NC |
GPIO7 |
NC |
GPIO8 |
NC |
GPIO9 |
NC |
GPIO10 |
NC |
GPIO11 |
NC |
GPIO12 |
RA_RST |
GPIO13 |
RA_DIO1 |
GPIO14 |
RA_NSS |
GPIO15 |
XP_CS |
GPIO16 |
LCD_BLK |
GPIO17 |
RMII_CLK |
GPIO18 |
ETH_MDIO |
GPIO19 |
RMII_TXD0 |
GPIO20 |
NC |
GPIO21 |
RMII_TX_EN |
GPIO22 |
RMII_TXD1 |
GPIO23 |
ETH_MDC |
GPIO24 |
NC |
GPIO25 |
RMII_RXD0 |
GPIO26 |
RMII_RXD1 |
GPIO27 |
RMII_CRS_DV |
GPIO28 |
NC |
GPIO29 |
NC |
GPIO30 |
NC |
GPIO31 |
NC |
GPIO32 |
MOSI |
GPIO33 |
SCK |
GPIO34 |
RA_BUSY |
GPIO35 |
MISO |
GPIO36 |
NC |
GPIO37 |
NC |
GPIO38 |
C |
GPIO39 |
PEN |
|
|
|
|
Main Processor Chip |
ESP32 WROOM32 with dual-core 32-bit LX6 microprocessor from Xtensa @ 240MHz |
LoRa RF transceiver module |
RA-01H |
RA-01H Supports frequency band |
803MHZ-930MHZ |
RA-01H Support modulation method |
FSK、GFSK、MSK、LoRa |
Channel |
Single channel |
Support Lorawan protocol |
Support Lorawan 1.0.3 |
WiFi Antenna |
SMA 2.4G WiFi Antenna |
Communication distance |
Obstructed state: up to 1 km Unobstructed state: up to 1.8 kilometers |
Development environment |
Arduino/Micropython |
Interface and function |
1x USB-C interface, 1x Ethernet Interface, 1x Boot Button, 1x Reset Button, 2x Indicator Lights. |
Working input voltage |
USB DC-5V |
Operating Temperature |
-10°C ~ 65°C |
Dimensions |
65mm(L)x58mm(W) |