An alternative clock with a unique style, easy to build, and a great piece of furniture! Introducing the new Floppy Voltmeter Clock!

Ask anything, get answers on the go! Build a portable voice assistant with Gemini AI & ESP32 for seamless, smart voice interactions

Build the ESP-FLY, a tiny, phone-controlled ESP32 pocket drone powerful enough to fly indoors & outdoors!

This project aims to produce a fully assembled Meshtastic node based on the ESP32-S3 and RA-01SH, both of which are avaliable for assembly by JLCPCB. The only components to be bought outside are the antenna and LiPo battery. The PCB will include battery charging and SMA connector. Meshtastic® is a project that enables you to use inexpensive LoRa radios as a long range off-grid communication platform in areas without existing or reliable communications infrastructure. This project is 100% community driven and open source! Meshtastic utilizes LoRa, a long-range radio protocol, which is widely accessible in most regions without the need for additional licenses or certifications, unlike HAM radio operations. These radios are designed to rebroadcast messages they receive, forming a mesh network. This setup ensures that every group member, including those at the furthest distance, can receive messages. Additionally, Meshtastic radios can be paired with a single phone, allowing friends

Smart Plant Guardian is an IoT-enabled, energy-efficient plant care system that automatically monitors and maintains optimal growing conditions while providing real-time data to users through a mobile app.

This universal power supply board is a perfect match for powering the low power devices such as MCUs, Sensors & Modules with the best load and line regulation features. The board can take an AC or DC input of as low as 8V and as high as 28V to provide a multiple DC output voltages like 3.3V, 5V, 12V, variable DC output, and the output same as the input. The maximum load regulation is measured to be 60mV and the maximum line regulation is measured to be 0.2%/V.

The P-Bit is a compact, modular IoT platform designed for hands-on STEAM and sustainability education. Equipped with temperature, humidity, light, sound, and soil moisture sensors, it allows students to collect real-time environmental data, analyze trends, and connect to the cloud for deeper insights. It features an ESP32-WROOM-32E processor with Wi-Fi and Bluetooth connectivity, a 1.8” TFT display, a rotary encoder, and GPIO/I²C expansion for additional sensors. Students can monitor microclimates, optimize irrigation, and study noise pollution through an intuitive interface. By integrating IoT and data science into the classroom, P-Bit helps address the urgent need for climate literacy, empowering the next generation with the tools to understand and protect the environment. More than just a sensor, it is a gateway to smarter, more sustainable learning.

DIY Groovebox / Synthesizer / Sequencer with 6 OP FM, VA, 2x16 MIDI Channels and 8 voice Chromatic Sample Player, based on a Teensy 4.1

The ESP32 Portable Inductance Meter is a low-cost, high-precision tool designed for students, researchers, and hobbyists, offering ESP32-powered processing, dual reference capacitors for enhanced accuracy, and a rechargeable portable design—making inductance measurement more accessible and reliable for educational and experimental use.

Flea-Scope™ is a very low-cost ($18 from Elecrow) and easy-to-use 18 million sample-per-second (Msps) USB oscilloscope and mixed-signal logic analyzer with a built-in waveform generator, and so much more, based on the PIC32MK MCU!

The ESP32-BlueJammer (Bluetooth jammer, BLE jammer, WiFi jammer, RC jammer) disrupts various devices using an ESP32 and nRF24 modules, causing plenty of noise and sending unnecessary packets (DoS). It interrupts: The whole 2.4GHz broadband! Everything that works on 2.4GHz is being interfered, like: audio in speakers being transmitted over bluetooth, microphones on 2.4GHz, smartphone connections, WiFi, RC Drones (etc.), IoT devices, smart gadgets, wireless keyboard & mouse, just anything on 2.4GHz! Ideal for controlled disruption and security testing. Based on 2,4GHz communication. It has a big range (over 30Meters+ - may vary on your antenna and hardware setup!) on newest Bluetooth versions with casual 2.4GHz antennas, you can easily increase this aswell by taking some simple "bigger" router antennas. An amplifier (2.4GHz) may be an good option too! Remember that jamming is illegal and should not be used with malicious intent! This is strictly for educational purposes only!