Introducing our Advanced 8-Channel RC Transmitter and Receiver System a pinnacle of innovation for RC enthusiasts. Powered by STM32F103C8T6.

Build a miniature DIY FPV drone that operates fully on Arduino hardware for a fun learning experience and thrilling living room racing.

A single board arduino nano controlled DCC accessory decoder for control of upto 16 servos with led output indication.

In this project, we will build a tiny internet clock connected to your wifi to get time from NTP servers.

This is certainly the cheapest and simplest Internet radio that you can make yourself if you have minimal knowledge in the field of electronics, and all thanks to this universal and practical display module.

In this tutorial, I am going to use the ULN2003 IC to create a simple, inexpensive water level indicator.

In the year 2021 I created a "Internet Hardware WatchDog" using NodeMCU which reboots my home router whenever there is an issue with the Internet. This device sits next to my router and happily takes care of it whenever it has a hiccup. This year, I wanted to extend the watchdogs horizon by adding an "Internet Status Notifier" that displays the current status of the Internet using an RGB LED.

infrared thermometer that can be worn like a ring on the finger. The thermometer has an infrared temperature sensor under the ring, and the temperature reading is displayed on an OLED screen on top of the ring

This guide demonstrates how to craft a Star Wars game with the ESP8266, OLED Display, and Joystick Module

This project features an e-paper display that shows real-time weather information, including temperature, sky conditions, humidity, and visibility. It's an energy-efficient solution with a sleek design.

This project aims to develop a real-time monitoring system for important water quality parameters such as temperature, turbidity (TDS & turbidity), and pH. The device utilizes sensors such as DS18B20, SEN0244, SEN0189, and pH 4052c, integrated with a WiFi-based Robotdyn Arduino Uno microcontroller, and displays data in real-time via the IoT platform Thinger.io. This system not only displays data on an LCD screen, but can also be accessed from anywhere via a cloud dashboard, and data can be downloaded at any time. Testing was conducted over 7 days and the results showed a fairly good level of accuracy and precision, as well as compliance with the BBPBAT Buleleng koi pond water quality standards. Perfect for those interested in IoT, aquaculture, agricultural automation, or electrical engineering thesis projects! ???? Jangan lupa like, follow, dan comment..