Weather Crow is an ESP32-S3 based weather station featuring an E-paper display that shows current weather conditions and forecasts. This initial release provides a complete solution for monitoring local weather with minimal power consumption through efficient deep sleep cycles. the project is under the MIT license, so you can modify or chage as you want!!

Effortlessly monitor your home's energy consumption with the DIY Smart Powermeter, seamlessly integrated with the user-friendly Home Assistant platform. This powerful project provides real-time data on your household's energy usage and offers the added convenience of a snapshot of your grid's status whenever you open the electric closet, thanks to the 2.9' e-paper display. Featuring an integrated 230VAC to 5VDC regulator, the ESP32-S2 efficiently harnesses power from surrounding wires for optimal performance. The Smart Powermeter supports up to six different CT clamps, with or without a burden resistor, allowing for versatile monitoring options. Additionally, it can measure ambient temperature, giving you comprehensive insights into your energy consumption and surroundings.

tiny LiDAR laser range finder ” anUltra Compact LiDAR Distance Meter/Range Finder

In the year 2021 I created a "Internet Hardware WatchDog" using NodeMCU which reboots my home router whenever there is an issue with the Internet. This device sits next to my router and happily takes care of it whenever it has a hiccup. This year, I wanted to extend the watchdogs horizon by adding an "Internet Status Notifier" that displays the current status of the Internet using an RGB LED.

The DIY Heating Booster helps you get more out of your existing radiator – without modifying your heating system. An ESP32 controls 12V fans mounted underneath the radiator, automatically turning them on when the radiator gets warm to efficiently distribute heat throughout the room. The control logic works standalone with a local temperature sensor, but can also be fully integrated into Home Assistant. Perfect for cold spots, smart upgrades, and energy-saving DIY solutions.

Build the ESP-FLY, a tiny, phone-controlled ESP32 pocket drone powerful enough to fly indoors & outdoors!

Hackable, fully open-source gamma-ray spectrometer using a scintillator crystal and popular silicon photomultipliers.

This project features an e-paper display that shows real-time weather information, including temperature, sky conditions, humidity, and visibility. It's an energy-efficient solution with a sleek design.

AMAZING DIY DESKTOP CHARGING STATION.IT IS MINI IN SIZE,BUT IYT HAS POWER LIKE MONSTER.

Build a Parking Sensor with the TOF10120 IR Laser Distance Sensor and a CrowPanel 3.5" ESP32 Display. A parking sensor helps you to avoid obstacles while parking, for instance, by measuring the distance between your car and the garage wall. This Parking Sensor accurately measures the remaining distance and shows it in big, color-coded digits. It furthermore features a set button that allows you to set the warning distance.

This is a small (17.9 mm x 10.3 mm) breakout board for PixArt's PAA3905 optical flow sensor. It provides X-Y velocity at 126 Hz via Optical Flow and 35 x 35 pixel video camera at 18 Hz. There is a well-commented Arduino sketch showing how to use the device for navigation and frame grabbing. The frame grab rate is significantly improved over its predecessor, making for a practical low-resolution still imaging and video camera capability. Power usage is a modest 3.5 mA and the sensor can move in and out of shutdown mode quickly allowing flexible power management. The light level adjustment is automatic (although can still be done manually), streamlining sensor management. The sensor is smaller than its predecessors, with fewer pins making design and assembly easier. Light level sensitivity extends down to 5 lux. The frame grab occurs at a crisp ~15 Hz (56 milliseconds to complete), allowing low-resolution video imaging using the infrared-sensitive sensor element. Open source design!