Crowtail- Vibration Motor

From Elecrow
Jump to navigation Jump to search

Description

This is a mini vibration motor suitable as a non-audible indicator. When the input is HIGH, the motor will vibrate just like your cell phone on silent mode.

Model: CT0014VM

Crowtail- Vibration Motor.JPG

Features

  • Crowtail compatible
  • Low power consumption
  • High reliability

Specification

Dimensions(mm):40.0(L)x20.0(W)x6.9(H)

Item Min Typical Max Unit
Voltage 3.0 5.0 5.5 V
Control Mode Logic Level

(When Logic HIGH, the motor is ON. When LOW, the motor is OFF.)

-
Rated speed 9000 rpm

Usage

Here is an example showing how to turn on the vibration motor.

1. Plug it onto the Digital port 5 of Crowtail - Base Shield using a Crowtail cable.

2.Plug the Crowtail - Base Shield onto Arduino.

3. Connect Arduino to PC by using a USB cable.

400px

4. Copy and paste code below to a new Arduino sketch, and upload it to your Arduino.

int MoPin = 5;    // vibrator connected to digital pin 5
void setup()  { 
 pinMode( MoPin, OUTPUT );
}  
void loop()  {  
   digitalWrite(MoPin, HIGH);         
   delay(1000);                           
   digitalWrite(MoPin, LOW);         
   delay(1000); 
}

5.When you upload the code complete,you can see the vibrating motor vibrate at one second intervals.
400px

Resource