CrowPi-L
Jump to navigation
Jump to search
Contents
- 1 Description
- 2 Features
- 3 Specifications
- 4 SAFETY WARNING
- 5 Parameters
- 6 Uasage
- 6.1 Hardware
- 6.1.1 Install Raspberry Pi and boot
- 6.1.2 Use of camera and microphone
- 6.1.3 Use of wireless mouse
- 6.1.4 Use of touchpad
- 6.1.5 Connect to the network
- 6.1.6 Screen brightness adjustment
- 6.1.7 Charging and battery
- 6.1.8 Dual system switch
- 6.1.9 Support external storage
- 6.1.10 Use of expansion screen
- 6.1.11 Use of headphone/speaker
- 6.1.12 Use of GPIO port
- 6.2 Program Lesson
- 6.1 Hardware
- 7 FAQs
- 8 Resources
Description
CrowPi-L is a lite version born out of CrowPi2, "L" stands for Lite, Light, and Laptop. This is a real Raspberry Pi computer. We collected a lot of opinions from CrowPi users and Raspberry Pi enthusiasts, focusing on solving many inconveniences of using Raspberry Pi DIV laptops, such as installing Raspberry Pi , switching system, heat dissipation, expanding screens, etc. Better yet, we still retain the highlights of the CrowPi series, built-in course system. Users will have a new experience bringing by Crowpi-L.
Model: SER35001L
Features
- 11.6-inch 1366*768 IPS screen, sleek body made out of environmentally-friendly material, portable and delicate.
- Come with keyboard and touchpad, which are the assistant for using Raspberry Pi.
- Built-in fan and air circulation cooling system designed to protect the smooth operation of the Raspberry Pi system.
- 40 pin expansion Raspberry Pi pin, allow users to connect the onboard sensor or output independently, which can help build Raspberry Pi projects faster and enables more creative usage.
- 2 megapixels camera which is integrated with microphone, and also equipped with stereo output speakers.
- The Type-C interface supports 9-20V wide voltage input, and a built-in 5000 mAh battery, which supports the device to work independently for more than three hours, and the software synchronously displays the battery power status.
- The HDMI expansion port can be used to connect an external monitor, and the audio expansion port allow headphone or speaker to be connected.
- Equipped with self-developed learning software, customized UI that is more suitable for traditional computer users, making software and hardware programming learning easier and more convenient.
- Unique dual system switching function and extended storage function.
Specifications
Item | Value |
Model | CrowPi-L |
Size | 291(Length)*190(Width)*46(Height)mm |
Weight | 1.1kg |
Screen | 11.6 inch 1366*768 IPS screen |
Camera | 2 megepixels camera with microphone |
Power Supply | DC 12V 2A |
Power Connector | USB-C interface |
Keyboard | Built-in USB keyboard |
Touchpad Function | Support |
Mouse | 2.4G mouse |
Audio Output | Stereo speakers |
Volume Adjustment | Support |
Screen Brightness Adjustment | Support |
Induction Screen Function | Support |
External Storage | Support |
Extended Screen Function | Support |
Audio Output Interface | 3. 5MM headphone jack |
Equipment Compatible | Raspberry Pi 4B |
Dual System Function | Support |
Support Operating System | Raspbian, Ubuntu, CentOS, Windows IOT, Kail, Pidora, ArchLinux, FreeBSD, Kodi, OpenWrt, RISC OS, RetroPie, LAKKA, Recalbox, LibreELEC, OSMC |
Certification | CE FCC Rohs |
SAFETY WARNING
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance.
- Cleaning and user maintenance shall not be made by children without supervision.
- WARNING: Use the detachable supply unit provided with this appliance only.
Parameters
Uasage
Hardware
Install Raspberry Pi and boot
- CrowPi L Rapspberry Pi Laptop Install Video
- Correctly Install and Disassemble the Raspberry Pi Laptop
- Step 1. Install the screws for Raspberry Pi which will be installed in the laptop
- Step 2. Insert the 2-in-1 TF card adapter board into the TF card slot on the back of the Raspberry Pi
- Step 4. Install USB adapter board and connect the flat cable to HDMI expansion board
- Notice: The blue part is upward and the metal part is downward. Othervise there'll show nothing on the screen.
- Step 5. Put the assembled Raspberry Pi into the Raspberry Pi storage compartment, there is a magnetic base at the bottom of the compartment to fix the Raspberry Pi.
- Step 6. Connect the other end of the flat cable to the motherboard.
- Warning: Don't install with power on!
- Warning: Do not install it askew!
- Otherwise, a short circuit may occur and the flat cable may be burnt, and fingers may be burned!
- Step 7. Press the GPIO adapter board with fan from top to bottom to connect the 40 pins on both sides.
- Step 8. Cover the Raspberry Pi protective cover.
- Step 9. Plug the 12V/2A type-c power adapter and press the power button at the top of the keyboard to start using.
Use of camera and microphone
- Connect camera and microphone via USB, if there is abnormal, you need to first check whether the USB adapter is properly connected in the forth step of the "Raspberry Pi Installation and Booting" operation guide.
Use of wireless mouse
- 1. Take out the wireless receiver in the mouse compartment.
- 2. Insert the receiver into the USB port of the Raspberry Pi.
- 3.Turn on the power of the mouse to start normal use.
- Note: Your operation should follow the order above, don't turn on the power first.
Use of touchpad
- When CrowPi-L is working normally, press FN+F1 to unlock the touchpad for normal use, and press FN+F1 again to disable the touchpad function.
Connect to the network
- Insert the network cable into the network port of the Raspberry Pi or turn on the wireless network switch to connect to the wireless network.
Screen brightness adjustment
- When CrowPi-L is working normally, press F9 to decrease the brightness and press F10 to increase the brightness.
Charging and battery
- When using the type-c power supply, the battery can be charged. It takes 3 hours to fully charge the battery when it is not working. After being fully charged, it can support the device to work continuously for 3 hours.
Dual system switch
- The self-developed dual-system switching adapter board allows two TF cards to be inserted at the same time, and users can quickly switch the system through the switch on the switching board.
- Note: Switch operation need to do when machine is turned off, and turn on the laptop after switching successfully.
Support external storage
- The product provides an independent memory card interface, and users can connect an external memory card to expand the memory capacity.
Use of expansion screen
- CrowPi-L has set aside a standard HDMI interface for customers to use the expansion screen.
- Note: Affected by the Raspberry Pi 4B hardware, the expansion screen needs to be connected to the HDMI cable and screen before the Raspberry Pi is turned on, and the expansion screen can be used normally after turning on the device.
Use of headphone/speaker
- Compatible with headphones or speakers with 3.5mm interface
Use of GPIO port
- We specially designed the GPIO port adapter board for CrowPi-L. After the user plugs in the adapter board, the Crowtail series sensor can be connected externally, and users can learn software and hardware knowledge through our tutorials.
- Connection steps:
- Step 1. Connect the cable to the shield board
- Step 2. Insert the other end of the cable into the GPIO slot on the side of the laptop
Program Lesson
Letscode lessons
- 16 Game design lessons: Suitable for beginners, simple graphical programming can quickly output interesting game projects, which can help users build a programming system and exercise logical thinking.
- 24 Hardware control lessons: Letscode's advanced course adds a wealth of sensor knowledge. The combination of software and hardware can quickly output intelligent electronic projects, help users understand electronic circuits, open the door to hardware design, and exercise hands-on ability.
Python lessons
- 32 Python Introduction to syntax lessons: Suitable for students with basic graphical programming, systematic code programming introduction, staged project design, allowing users to learn the underlying logic of programming and improve logical thinking.
- 24 Python hardware control lessons : An advanced course for the introduction of Python syntax, complete hardware projects through code programming, consolidate and improve programming ability, and cultivate systematic design thinking.
FAQs
- 1. Unable to boot
- 1. Make sure you are using the correct charger and you inserted the SD card into the Raspberry Pi
- 2. Re-format and re-flash the SD/TF card. After booting the CrowPi L, use Gparted to resize the partition /dev/mmcblk0p2 where the image of CrowPi L is installed. For details, please refer to Step5 on this page .
- 2. The wireless mouse cannot be used
- Please ensure that the battery is sufficient and the wireless receiver has been inserted into the USB port of the Raspberry Pi
- 3. The touchpad cannot be used
- Please confirm that the touch function (keyboard touch function switch: FN+F1) is turned on
- 4. The screen is black and freezes
- Please check whether the high-current peripherals were mounted and led to insufficient power supply. It may also due to standby caused by long periods of non-use, use a touchpad or keyboard to wake up
- 5.The camera and microphone do not work
- The USB adapter connection is unstable, please re-plug
- 6. Unable to connect to the network
- Please turn on the wireless network or connect to the Raspberry Pi Ethernet port.
- 7. How to show battery status in the system tray of the native Raspberry Pi OS
- Here's a little app to show the battery status: https://github.com/ppyne/crowPi-L_BatteryStatus
- For details, please refer to this page.
- You can list you question here or contact with techsupport@elecrow.com for technology support.
Resources
CrowPi L image
CE_EMC certification
FCC_Certificate
ROHS_Certificate